Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Cedar or Redwood
-
11th August 2010, 12:26 AM #1Novice
- Join Date
- Jun 2008
- Location
- melbouurne
- Posts
- 11
Cedar or Redwood
Hi All
A while ago i purchased some rough sawn what i was told was Californian Redwood.
I have dressed some and it looks an awfull lot like Cedar, But it does not smell like cedar as every other time i have worked with Cedar it has a very distinct smell.
Does anybody know do they look similar?
How can you tell the difference?
Any help appreciated
Ivy
-
11th August 2010 12:26 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th August 2010, 04:02 AM #2
...an extract...
SEQUOIA (S) Sequoia sempervi
Family: Taxodiaceae
Other names: Californian redwood (UK and USA); vavona burr.
Distribution: USA.
General description: The heartwood colour is dull reddish-brown with a distinct growth ring
figure produced by contrasting early-wood and late-wood zones. It it straight grained, and
although much of the timber is of fine, even texture, some is coarser and heavier. The wood
is non-resinous and non-tainting. The average weight is 420 kg/m3
(26 lb/ft
3
); specific gravity
.42.
Mechanical properties: Strength tests reveal an extreme range of properties dependent on
growth rates and late-wood development. At its best rating, sequoia has low bending strength,
crushing strength and resistance to shock loads and very low stiffness.
Seasoning: Kiln drying should be undertaken with care to avoid collapse, but air drying is
rapid and with very little degrade. There is small movement in service.
Working properties: Works easily and well with both hand and machine tools with very
little dulling effect on cutting edges but splinters and chip bruises easily during machining. It
has poor nail-holding ability. Liable to stain with alkaline adhesives but can be glued easily
otherwise. Gives good results with paint and usual finishing treatments.
Durability: Logs are subject to attack by longhorn beetle and pinhole borer. The wood is
durable out of ground contact and moderately resistant to preservative treatment.
Uses: Exterior cladding, shingles, exterior joinery, wooden pipes etc. In America it is used
for vat making, especially where resistance to decay is required. Interior joinery, organ
building, especially for pipes, coffins, posts, panelling, and in the round for telegraph poles.
Rotary cut for plywood manufacture, and selected logs sliced for decorative veneers. The
bark is used for chipboard manufacture and filtering plant.
Note: Closely related to Sequoiadendron giganteum, (Lindl) Buch., wellingtonia (UK), and
Sequoia gigantea, (Lindl.) Deene, the giant redwood, (the largest known trees in the world),
the timbers of which are of little commercial value.
Wouldn't mind seeing a few pics of your Redwood, wet/planed to see the grain.
Go here to see a few pics, did I say a few...
Hope this helps.
Similar Threads
-
Redwood slab
By lenco in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 0Last Post: 15th December 2009, 09:23 AM -
Redwood
By Krunchie in forum SMALL TIMBER MILLINGReplies: 38Last Post: 28th September 2009, 11:43 PM -
Redwood and jarrah
By Tete de Bois in forum WOODWORK - GENERALReplies: 19Last Post: 8th December 2005, 10:09 PM