Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
-
20th May 2004, 10:44 PM #1Ron Winter Guest
Cheap sandpaper - Belts, discs etc??
Have a gecko at www.supergrit.com T/A Red Hill Corporation in the USA.....
I have been using them for 6 years and find them much cheaper for all types of abrasives. The Company is quick and dependable with orders taking about 9 days to get to Aus.
e.g. 50 of the 4 1/2" 120grit discs hook and loop for US$13.50
50 of the 6" 120grit discs hook and loop for US$15
aluminium oxide belts 4X24" 120grit 10 belts for US$11
4X36" 120grit 10 belts for US$15
even with the conversion from US$ and paying freight they are good value.
If you order too much you can get caught for import duties that can add up so beware. I usually try to stay under US$120 and it goes straight thru customs. Hope this helps some of you save some money!! Cheers
-
20th May 2004 10:44 PM # ADSGoogle Adsense Advertisement
-
20th May 2004, 11:11 PM #2
If you check arround your local abrasive specialiasts you will get deals similar to that without the freight of customs problems.
I buy 6" punched 6 hole hook & loop disks for between 50 & 65 cents each depending on brand
-
21st May 2004, 06:46 AM #3Ron Winter Guest
Soundman.......I have been unable to find anyone on the Sunshine Coast that can come near these prices, especially for the belts....can you give me the name of a company in Brissie??
-
21st May 2004, 01:51 PM #4
I would be interested in any supplier of 6" AO disks suitable for the festo rabdom orbit sander
regards
tony
-
21st May 2004, 08:43 PM #5Ron Winter Guest
G'day Tony,
If you have a look at Supergrits website www.supergrit.com
go to online catalogue, then to browse and discs you can have a look at the prices.
they have 6" discs solid, or with 6, 8 or 16 vacuum holes.
I think by the time you convert the prices to the Aussie dollar and pay freight it works out at about $1 per disc?? The best savings are in their belts!!
good luck,
Ron
-
23rd May 2004, 09:51 PM #6
active abrasives
07 3396 4457
at Manly
very helpfull
-
23rd May 2004, 10:22 PM #7Ron Winter Guest
Thanks Soundman, I'll try Active tomorrow and see if they can equal the prices that I've been getting.
Cheers Ron
-
23rd May 2004, 10:31 PM #8
you will find it hard to beat the friendly service.
-
24th May 2004, 12:42 AM #9Senior Member
- Join Date
- Oct 2003
- Location
- Perth
- Posts
- 158
Lynfurn in Balcatta, Western Australia will punch "Indasa" brand abrasives, hook and loop, to fit 6 hole, 8 hole etc , minimum 50, but they work about to about 70 cents each.
RegardsPete J