Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Children Desk Making Challenge!
-
26th September 2020, 04:32 PM #1New Members
- Join Date
- Sep 2020
- Location
- Australia
- Posts
- 2
Children Desk Making Challenge!
Hi
I’ve seen a desk (image attached) that would fit really well in my daughter’s bedroom but it’s not available in white and is also quite expensive. I’m considering making something similar.
I believe I’ll need to buy a dowelling tool for the joints but unsure of which model (Triton, Bosch, etc.) advice welcome. Also, how will the angle legs will be dowelled for the horizontal shelf supports; will I need to make an angled jig? I’ve read doweling T-joints is quite tricky to get right, is this true?
Was thinking dressed pine 70x30 uprights, 90x30 horizontal supports and 18mm premium grade ply shelves and drawers. However happy to be guided here.
Thanks in advance.
Amelia Desk Design.docx
-
26th September 2020 04:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th September 2020, 10:00 AM #2GOLD MEMBER
- Join Date
- Mar 2018
- Location
- Sydney
- Posts
- 1,166
Dowelling - I'd grab any dowelling jig (or make one, for example DIY Simple Dowel Jig - YouTube) but make sure you get dowel centre pins appropriate to your dowel sizes; they help immeasurably in making the second holes in the correct location.
The second desk in this video is pretty much what you want. You could do worse than replicate that ! DIY Desks Anyone Can Build - Beginner To Intermediate Woodworking - YouTube. It just uses ply for all the structure, rather than a blend of timber and ply for the flat surfaces.
good luck on it all.
-
27th September 2020, 02:03 PM #3GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 68
- Posts
- 2,343
Welcome to the forum.
-
27th September 2020, 04:23 PM #4
I'm going to suggest
1. that you build the "desk" unit using edged white melamine (or laminate) board.
2. that you buy the material you will need from a kitchen supplier and pay the supplier to edge the board for you using their machinery.
3. Seriously consider having the supplier to also supply the drawer runners and drill the case sides for them.
4. I note that the unit in your attachment is put together with knock down fittings. You can use this option -- in which case get the kitchen "man" to pre-drill everything for you -- or you could screw the unit together using brass (not steel) CHIPBOARD screws.
5. that the cost of using Melamine from a kitchen supplier will be considerably less than the cost of a single sheet of 18 mm furniture grade ply from a retailer like Mitre10 or the Green shed.
6. Also, the unit you have linked to is sturdy because it is stiffened by the way the shelves and desktop are attached.
If you are still serious about doing all the work yourself -- please think again. The knock-down fittings would be best installed using Woodpeckers' cross dowel jig (USD $180).
Note, I'm not recommending you buy the cross dowel jig, I'm merely trying to put a dollar figure on the cost of doing it yourself.
Then there's possibly the cost of a track saw, guide rails and right angle guides, etc.
If you really want to get involved with woodworking knock yourself out and go for it. But for a one-off project that your daughter will likely outgrow or replace when she starts high school ...regards from Alberta, Canada
ian
-
6th October 2020, 11:22 AM #5New Members
- Join Date
- Sep 2020
- Location
- Australia
- Posts
- 2
Thank you for the information. I hadnt thought about contacting a kitchen cabinet maker for the shelves. Im actually now going to make contact with a couple of kitchen cabinet makers to see if they can construct the entire desk out of 18mm thick kitchen mdf melamine. As much as Id like to have a crack at building the desk myself, a cabinet maker could produce in a fraction of the time plus my kids are pestering me to build them a mini skate ramp in the garden! Ill let you know how I go
Similar Threads
-
Any Chance of an Xmas challenge? Maybe children's toy?
By Miko Zaire in forum WOODWORKING CHALLENGESReplies: 10Last Post: 25th November 2015, 05:17 PM -
2010 WWF Box Making Challenge
By WWF Box Challenge in forum WOODTURNING - PEN TURNINGReplies: 2Last Post: 18th May 2010, 07:06 PM -
Most stable computer desk? Desk wobbles too much.
By qld in forum WOODWORK - GENERALReplies: 0Last Post: 8th September 2009, 12:16 PM -
Challenge box making August 2009.
By tea lady in forum WOODTURNING CHALLENGEReplies: 45Last Post: 5th August 2009, 11:41 PM -
Help making a desk
By Dion N in forum WOODWORK - GENERALReplies: 14Last Post: 18th June 2004, 09:01 PM