Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Converting garage to workshop
-
24th August 2008, 11:09 AM #1Novice
- Join Date
- Aug 2008
- Location
- Perth, WA
- Posts
- 10
Converting garage to workshop
Hi all.
I've finally got approval from She Who Must Be Obeyed to convert the garage into a woodshop (VICTORY! ). I've got about 6.7m wide by 5.3m deep to play with (about 3 x 2m of this is taken up by a home gym), so I should be able to get a decent setup happening. I've got ideas to start with the basics (decent workbench, tools, etc) and build up from there. Not to mention I've first got to build a carport (definitely worth it).
The main issue is the floor - it's very uneven and the cement doesn't properly cover the aggregate - in other words, it's as rough as, well, whatever it is that's very rough. My main concerns are firstly that any bench or stand or anything on legs will need adjustable legs (not a problem with things that stay in one place, but how to handle sawhorses?) Secondly, cleaning up will be difficult with all the crevices and holes (not to mention the whopping great crack that goes up the length of the garage).
Does anyone have any ideas of how to solve this problem?
Cheers,
Peter.
-
24th August 2008 11:09 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
24th August 2008, 11:14 AM #2
Maybe an industrial vac?
-
24th August 2008, 11:18 AM #3
I'd look in to getting the floor levelled with the sort of compound that tilers use.
Even though a shop vac will do the jod, eventually you will have bigger machines on mobile bases and you want a fairly smooth floor for those.
-
24th August 2008, 11:26 AM #4
Dig the whole lot out and start again
Another option is to put down a timber floor.
Lay down 42x19 treated pine slats about 450mm apart. As you put them down level them so you finsih up with a flat floor, Cover with plywood or tounge and groove flooring. Paint as afinish will make it look good.
This will be a lot more comforatable than standing on the concrete and you can run the electrics to your machines underneath. Also be a lot more comfortable for the gym gear.
You both win.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
24th August 2008, 12:08 PM #5
I would go the levelling compound.
-
24th August 2008, 10:27 PM #6
Yep, self levelling compund.
-
25th August 2008, 11:32 PM #7Novice
- Join Date
- Aug 2008
- Location
- Perth, WA
- Posts
- 10
Cheers for the tips folks.
I've come across a material called "Granosite" by Wattyl - it gets mixed with cement and used to fill gaps, even out surfaces, etc. I might see if I can get hold of a small amount and try it out in a corner. The timber floor option may not work the best in this situation as the ceiling height is low enough as it is.
I'm still looking also at tile levelling compound.
Thanks again.
P.
-
26th August 2008, 12:22 AM #8
Personally I'd go for Jim's suggestion... a wooden floor.
Partially to give me somewhere to run the ductwork and cabling (I'm sooo sick of tripping over the stuff) but mainly 'cos after several years standing on conc I'm sick of aching feet at the end of the day.
Yep, timber floors for this li'l black duck!
Although I gotta admit a self-levelling compound would make for a quicker & cheaper solution.
- Andy Mc
Similar Threads
-
Fridge panel shed/garage/workshop?
By autogenous in forum WOODWORK - GENERALReplies: 5Last Post: 9th April 2008, 01:01 PM -
How to keep you garage workshop safe
By sam63 in forum WOODWORK - GENERALReplies: 21Last Post: 15th March 2005, 09:44 PM -
Shed, Garage or Workshop?
By bitingmidge in forum WOODWORK - GENERALReplies: 36Last Post: 2nd July 2004, 01:09 AM