Thread: Corner cabinet question

The catalogue/spec sheet for whichever hinges you get often has planning/layout dimensions, so might be worth checking there first. Different manufacturers may need different clearances, even if the products look the same.

Thanks for the reply. Checked out the hettich site and was unable to find what I was looking for. Doors will be 18mm thick. To give clearances I was thinking door opening -23mm would be adequate. Does this sound right? I am looking for 2mm clearance between doors and between doors and side panels.

Originally Posted by Mick72

Thanks for the reply. Checked out the hettich site and was unable to find what I was looking for. Doors will be 18mm thick. To give clearances I was thinking door opening -23mm would be adequate. Does this sound right? I am looking for 2mm clearance between doors and between doors and side panels.

Half the fun is working out what to look for. Did a google search for hettich corner hinge layout and found this: http://www.hettich.com/fileadmin/con...termat_ENG.pdf Page 57

Hi, thanks for the link. When would you use one option over the other? It looks like the option on the left may be a neater look with the option on the right having a 5 mm gap between doors if I have understood it correctly.

Originally Posted by Mick72

Hi, thanks for the link. When would you use one option over the other? It looks like the option on the left may be a neater look with the option on the right having a 5 mm gap between doors if I have understood it correctly.

Not sure why you'd use one setup over the other, kitchen cabinetry isn't really my strong point. Definitely agree about the left option looking neater.