Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
Thread: Cricket stumps
-
28th November 2018, 10:14 PM #1
Cricket stumps
Since moving into a commercial space many positive things have happened. Which I’ll cover in another post soon.
Now I have a question for the brains trust.
I have been asked to make cricket stumps. But with a modification.
What i I want to ask is. How would you machine the point on the end where it goes into ground. These will prolly never be hammered in but need to have an authentic look.
currently I am toying with the idea of a jig fixed to the spindle moulder fence with a hole at the correct angle into which I would feed the stock.
What say you? Hit me with your ideas.
cheers
BevanThere ain't no devil, it's just god when he's drunk!!
Tom Waits
-
28th November 2018 10:14 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th November 2018, 11:40 AM #2
Sounds like an OK idea just don't get carried away and end up with short stumps. I am remembering the first time I used an electric pencil sharpener
Regards
John
-
29th November 2018, 11:46 AM #3
something akin to a pencil sharpener
Veritas has this Veritas® Tapered Tenon Cutters - Lee Valley Tools and for a sharper point this Veritas® Tapered Tenon Joinery System - Lee Valley Tools
but the same can be achieved with a hardwood block and plane blade
regards from Alberta, Canada
ian
-
29th November 2018, 11:52 AM #4
The only problem I see with that is a possible OH&S issue. While it's perfectly possible to do, if the operator got a tad too enthusiastic feeding in the stump at the start - or turning the stump too quickly once in position - the cutters could grab too big a chunk,
This'd either spin the stump in the operator's hands (ouch! friction burn!) or do the usual big bite routine, from which the work-piece rarely escapes unscathed.
Personally, I'd just rip down some square stock and slap it into a wood-lathe... Shouldn't take more than 5 mins each from go to whoa, complete with any desired beading/decoration, once you get into the groove.
- Andy Mc
-
29th November 2018, 10:21 PM #5
There are 500 to do.
There ain't no devil, it's just god when he's drunk!!
Tom Waits
-
29th November 2018, 11:26 PM #6
Do you have a lathe?
If so, a "pencil sharpener" mounted in the chuck, with the stump guided by two or three steady rests would be my suggestion.
with a bit of ingenuity, a Veritas taper tenon cutter could be chucked in a high torque drill, and the drill mounted horizontally.
and if you can develop the necessary eye-hand coordination, a carpenter's ax is possibly the fastest way to point a round stick. I wouldn't be surprised if a skilled ax man could point a stump in under 30 seconds.regards from Alberta, Canada
ian
-
4th December 2018, 10:00 PM #7
At tech we weren’t to use the disc to put taper on the dowels for coreboxes or patterns.
A sharp chisel is much quicker once you factor in walking and waiting for the disc to get up to speed.
I can never understand woodworkers who have a pencil sharpener in their shop.
A chisel is quicker and a chisel point on the pencil will track better in a knifed line.
That being said you need to machine these.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
5th December 2018, 09:41 PM #8
make out of fiberglass and just paint.
I would love to grow my own food, but I can not find bacon seeds
-
6th December 2018, 12:01 PM #9
-
6th December 2018, 12:10 PM #10
then when the match gets nasty you have a weapon to attack the other team. forgive my nasty streak.
I would love to grow my own food, but I can not find bacon seeds
-
6th December 2018, 01:38 PM #11
In that case I'd suggest that instead of a spindle moulder you down-size to a good, robust router with a 2" straight flute bit.
ie. still make a heavy duty powered pencil sharpener, but one that's less likely to remove the skin from your hands if something goes wrong.
I'd also lay the router on it's side at a height such that you could hold/manoeuvre the stump comfortably while you sharpen. With 500 to do, that wouldn't be an insignificant factor! (Not to mention safer overall...)
- Andy Mc
-
6th December 2018, 09:14 PM #12GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
What about a disc sander, with a jig like you suggested for the spindle Moulder.
Slower then the Moulder but you get to keep your fingers.Apologies for unnoticed autocomplete errors.
-
6th December 2018, 10:15 PM #13
Thanks for all of your help peeps.
further investigation says that I am not competitive. I have other projects to move forward with. All good.
cheers
BevanThere ain't no devil, it's just god when he's drunk!!
Tom Waits
Similar Threads
-
Sorry more stumps
By Barterbuilt in forum SMALL TIMBER MILLINGReplies: 23Last Post: 6th May 2013, 06:34 PM -
stumps
By Woodkid in forum TIMBERReplies: 1Last Post: 16th July 2011, 01:17 PM -
Steel stumps versus Concrete stumps
By Doreen in forum FLOORING, DECKING, STUMPS, etc.Replies: 1Last Post: 2nd February 2007, 04:27 PM -
stumps
By stevox in forum FLOORING, DECKING, STUMPS, etc.Replies: 3Last Post: 2nd November 2003, 06:18 PM