Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Cut list, some help please.
-
7th July 2007, 01:08 PM #1
Cut list, some help please.
I need to cut a bunch of shelves to go into a newly built pantry. 16mm melamine will be used with a timber edging, but I'm unsure what sizes are available.
I need the following shelves:
qty x L x W
4 x 1020 x 350mm
2 x 1430 x 350mm
4 x 1430 x 300mm
6 x 940 x 120mm
1 x 2180 x 170mm
I know you can get the standard 1200 x 2400, but there are also longer sheets that may be more economical to buy. Are there any experienced guys online that could help me here please (I am on a short timeline, the missus wants to get into her new pantry )
-
7th July 2007 01:08 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
7th July 2007, 03:09 PM #2
Other sizes they come in are 3600 x 1200 and 3600 x 1800. These are big sheets though and you need 2 people to handle them.
I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
-
7th July 2007, 03:18 PM #3SENIOR MEMBER
- Join Date
- Jan 2004
- Posts
- 686
Hi Groggy,
You can easily get this out of two sheets.
I just typed your sizes in this one:
http://www.rrdrummond.com/demo1.htm
It says you need three panels, but I can easily see how to fit it into two.
CHeers,
eddie
-
7th July 2007, 04:09 PM #4
-
7th July 2007, 08:27 PM #5
-
7th July 2007, 09:43 PM #6
Thanks Bob, I have managed to get it all out of two sheets of 1200 x 2400. This way I can carry it on the ute. It may be more efficient out of 3600s but I can't carry them.
Similar Threads
-
Depth of Cut for "Loose" Sliding Dovetails?
By cyface in forum INCRA JIGSReplies: 2Last Post: 3rd May 2007, 02:01 AM -
Most difficult cuts
By Tiger in forum WOODTURNING - GENERALReplies: 13Last Post: 2nd April 2007, 02:25 AM -
Chainsaw ripping blade... but not a rip cut?
By Dean in forum WOODWORK - GENERALReplies: 30Last Post: 23rd February 2007, 12:37 PM -
Need jig for Triton - 22.5 degree cut
By barrysumpter in forum TRITON / GMCReplies: 4Last Post: 5th October 2001, 03:11 PM