Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Delta 36-600 Tablesaw
-
23rd January 2008, 10:05 PM #1New Member
- Join Date
- Jan 2008
- Location
- Mt. Dandenong
- Posts
- 4
Delta 36-600 Tablesaw
Can anyone PLEASE tell me the spanner size I need to undo the nut which holds the blade in place ? I was given the tablesaw but it has no instruction book or tools with it.
-
23rd January 2008 10:05 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd January 2008, 10:41 PM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,814
-
24th January 2008, 10:03 AM #3rrich Guest
The spanner should be 22mm or 7/8".
Stand on the operator side of the table saw as if you are feeding timber into the saw. Raise the plade to the full height. Use a scrap of timber against the teeth of the blade to prevent the blade from turning. Put the box end of the spanner over the arbour nut and pull the spanner towards you. (This should be true for BOTH left and right tilting saws.)
To install the blade, rest the spanner on the table top and pull the blade towards you. This will tighten the blade for use.
-
24th January 2008, 09:43 PM #4New Member
- Join Date
- Jan 2008
- Location
- Mt. Dandenong
- Posts
- 4
I have been turning the nut in the opposite direction to which the blade spins but have been using a shifter as I don't have a spanner which fits.
-
24th January 2008, 09:51 PM #5New Member
- Join Date
- Jan 2008
- Location
- Mt. Dandenong
- Posts
- 4
I have been trying to turn the nut with a shifter in the opposite direction to which the blade spins.
-
24th January 2008, 09:54 PM #6New Member
- Join Date
- Jan 2008
- Location
- Mt. Dandenong
- Posts
- 4
Thank you for the information. I will obtain a spanner in the size you suggest.
Similar Threads
-
Delta 40-540
By Enraf in forum SCROLLERS FORUMReplies: 2Last Post: 22nd March 2006, 12:35 AM -
Delta - Gmc??
By TEEJAY in forum SCROLLERS FORUMReplies: 14Last Post: 30th November 2005, 09:11 AM -
ATS Tablesaw
By Outsider in forum HAND TOOLS - POWEREDReplies: 6Last Post: 19th May 2005, 10:47 AM -
Got my new Delta saw !
By scooter in forum SCROLLERS FORUMReplies: 15Last Post: 6th November 2004, 10:42 PM -
Delta P-20
By oges in forum SCROLLERS FORUMReplies: 5Last Post: 28th September 2004, 05:44 PM