Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
17th January 2005, 05:04 AM #1
New Member
- Join Date
- Jan 2005
- Location
- South Africa
- Age
- 61
- Posts
- 7
Diffrence between Triton Mark 3 and Workcentre 2000
Hi
I would like to buy a Triton 2000 workcentre but in South Africa they are too exspensive. I found a Mark 3 Workcentre and would like to know, does the Mark 3 do what the 2000 can?
Also can I fit the Router table ( 2000 model ) to the Mark 3.
Basically I would like to know, is it worth buying the Mark 3 workcentre?
Thanks for all your help in the past guys.
Cheers
vaughan
-
17th January 2005 05:04 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th January 2005, 09:03 AM #2
The typo kign
- Join Date
- Aug 2003
- Location
- Melbourne - Outer East Foothills
- Posts
- 6,786
Vaughan, do a search, it's been thrashed around here numerous times. In short, if the Mk3 is all that is available then get one, they are a good unit.
If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
17th January 2005, 11:57 AM #3
The West is Best
- Join Date
- Jul 2004
- Location
- Perth WA (Carine)
- Age
- 65
- Posts
- 1,325
Vaughan,
it may be cheaper to relocate to OZ and purchase all the Triton gear you want. (Well thats what I did any way) Then continue to use it here as the after sales service from the Triton guys in Melbourne is very good.
Have a great day.
Les
-
17th January 2005, 05:10 PM #4
New Member
- Join Date
- Jan 2005
- Location
- South Africa
- Age
- 61
- Posts
- 7
Thanks Les
Hi Les
I wish I could relocate from this country as with everthing that is going on. I will do a search again. Thanks for the help.
Vaughan
-
24th January 2005, 11:36 PM #5
Super Moderator
Dodgy brother
- Join Date
- May 2004
- Location
- Pakenham, outer Melb SE suburb, Vic
- Age
- 55
- Posts
- 4,158
Vaughan, just be careful mate, the Mk 3 has something intangible about it that arouses those jig builders amongst us... it's a worry......
Good luck finding a workcentre......cheers...........Sean
The beatings will continue until morale improves.
-
29th November 2010, 03:43 PM #6
Intermediate Member
- Join Date
- Nov 2010
- Location
- Brisbane
- Posts
- 32
I'd like to resurrect this (if it's not against the rulebook).
There are a few Mk3's out there. Should I avoid them in favour of the 2000? Money's the principal driver behind looking at the 3s (of course).
Cheers
-
29th November 2010, 04:41 PM #7
Member
- Join Date
- Oct 2009
- Location
- Sydney
- Posts
- 73
[QUOTE=Vaughan;114058]Hi
I would like to buy a Triton 2000 workcentre but in South Africa they are too exspensive. I found a Mark 3 Workcentre and would like to know can I fit the Router table ( 2000 model ) to the Mark 3.
Hi Vaughan,
Yes both the 2000 Router table and the RTA 300 Tables will fit the Mark-3 but you will also need a Router mounting plate for the 2000 router top.
Cheers Warren.
Reply With Quote
