Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Edge strip glueing
-
25th August 2012, 12:55 PM #1Senior Member
- Join Date
- Sep 2005
- Location
- Perth
- Age
- 52
- Posts
- 143
Edge strip glueing
Hi all
I am in the process of making a new benchtop for a cupboard in my shed. I have made the top with 2 18mm pieces of plywood glued and screwed together. I am now in the process of puting a jarrah edge all the way around it. I have cut all the pieces required and was about to just glue it on, I hesitated wondering if I should use something extra like biscuits, dowels or even screws.
The edging is 19x36mm jarrah.
Any thoughts?
Here a some pics just in case.
Nigel
-
25th August 2012 12:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th August 2012, 01:02 PM #2
I usually just glue and shoot a few nails in to hold in place until the glue goes off.
Check my facebook:rhbtimber
-
25th August 2012, 01:12 PM #3Senior Member
- Join Date
- Dec 2008
- Location
- Tasmania
- Posts
- 430
Fixing edging
Hi Legin,
Do it right mate. Drill for 10 g x 38mm screws and counter bore with good 12.5 mm drill: glue and screw on edging, plug holes with jarrah or contrasting timber :cut off with flush cut saw or sharp block plane. Great job first and only time.
Cheers Old Pete
-
27th August 2012, 12:46 AM #4Senior Member
- Join Date
- Sep 2005
- Location
- Perth
- Age
- 52
- Posts
- 143
Thanks for the replies.
I ended up screwing and glueing it on. I didnt have a plug cutter so I had a good excuse to go and buy one. Plugged the holes and used a block plane to trim them down. It looks great.
Similar Threads
-
Wood Edge Strip
By Horus28 in forum WOODWORK - GENERALReplies: 14Last Post: 8th May 2011, 05:15 PM -
T Shaped Plastic Edge Strip
By andy_haywood in forum TIMBERReplies: 0Last Post: 3rd December 2009, 09:00 PM -
edge glueing
By SAISAY in forum WOODWORK - GENERALReplies: 4Last Post: 20th May 2008, 10:39 AM -
T Shaped Plastic Edge Strip
By echnidna in forum WOODWORK - GENERALReplies: 10Last Post: 25th December 2006, 04:30 PM -
Edge Glueing Revisited (help a newbie out)
By rockinrob in forum WOODWORK - GENERALReplies: 32Last Post: 15th April 2005, 10:56 AM