Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Epoxy V's Radiant Heat
-
22nd September 2014, 02:05 PM #1
Epoxy V's Radiant Heat
I'm cleaning up a really old/nice redgum slab with a view to making a mantle piece over an open fire. I have a few natural defects, gum veins etc. I was considering filling them with clear epoxy to make a feature of them but wondered if the radiant heat from the occasional open fire may have any ill effect on the epoxy. Nothing on the can about this sort of problem.
RegardsDave
All that is necessary for the triumph of evil is for good men to do nothing.
Edmund Burke 1729 - 1797
-
22nd September 2014 02:05 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd September 2014, 06:49 PM #2
It shouldn't, as long it is far enough to be safe for the timber (scorching etc), it should be Ok for epoxy/resins.
Neil____________________________________________Every day presents an opportunity to learn something new
-
22nd September 2014, 09:05 PM #3
Cheers Neil ~ Scorching wont be a problem, it is far enough away to avoid that. I was more concerned about the epoxy melting / contracting / expanding.
Dave
All that is necessary for the triumph of evil is for good men to do nothing.
Edmund Burke 1729 - 1797
-
26th September 2014, 09:24 AM #4
hi Dave,
Your post reminded me that, many years ago, I helped a neighbour and friend, who was a high-end builder, do the same thing for a client. The customer wanted a hand adzed red gum slab as a manlepiece over a rather large open fire place. As this was on a rural property and in the NSW Southern Highlands there was a high probability that this fireplace would be well used. My mate wasn't prepared to risk the timber slab let alone the filling epoxy, so we routed a recess on the bottom face and fixed a piece of compressed concrete flooring (= thick fibro?) into the recess. It went back as far as touching the wall and forward to within 50mm of the front and ends with big radius corners and was painted the same colour as the wall. The filling epoxy was then only used on the face and top. 20 odd years later it's still there.
flettya rock is an obsolete tool ......... until you don’t have a hammer!
Similar Threads
-
Repair of epoxy on timber joint - epoxy to epoxy?
By bcp in forum GLUEReplies: 3Last Post: 3rd September 2014, 09:54 AM -
EPOXY (HIGH CLARITY) RESIN + HARDENDER (2:1 RATIO)EPOXY
By Lyle in forum WOODTURNING - GENERALReplies: 8Last Post: 9th May 2014, 06:48 PM -
Can you sand Black pc 7 epoxy to a flat surface if some epoxy over flow jarrah wood?
By E****d in forum WOODWORK - GENERALReplies: 3Last Post: 27th September 2011, 10:26 PM