Hi all,

I have joined your forum guys to see if anyone may have any info on a ERMO - 058, Edge Bander.
I am an electrician and today was asked by a client to have a look at one of these ERMO edge banders (He is a cabinet maker).
He bought this machine not long ago, second hand, so he isn't that familiar with it
Everything on the machine seems to function, the glue heater, glue roller, feed and triming etc. But the guy who owns it seems to think its not working in the right sequence.
I guess the following will only make sense to anyone who has actually used one of these, but heres hoping.

This thing has an "end triming" switch which works because it actuates what he called the gillotine, which from my observation cut the edging tape off flush with the end of the board.
The board then continues to move thru the machine and the edge tape is trimmed flat. This is because the triming switch is on. The triming switch is a 2 postition switch, so you can either turn it to triming or turn it to radius triming. The problem he seems to think it has is that when you turn the switch to raduis triming the gillotine dosen't actuate. I am not sure how its all meant to work, so i am wondering if anyone knows, dose the gillotine only work when triming is selected or is it meant to work when radius triming is selected as well?

Any help would be appreciated
Regards,
Mick