Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Flux brushes
-
5th January 2022, 12:02 AM #1GOLD MEMBER
- Join Date
- May 2009
- Location
- melb
- Posts
- 1,125
Flux brushes
What is so special about flux brushes? Seems like every woodworker on youtube uses it for gluing - PVA, epoxy, whatever.
Why specifically these flux brushes with the small metal handle? Looks like this:
Tradeflame Flux Brushes - 5 Pack - Bunnings Australia
Can be bought on ebay and amazon cheaper than bunnings
But why not just use regular paint brushes what are even cheaper?
50-200pcs Flat Paint Brushes Small Brush Bulk for Detail Painting Craft Art Gift | eBay
-
5th January 2022 12:02 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th January 2022, 12:23 AM #2
*shrug*
For gluing, I use a silicone brush... been going on the same one for ages, because the glue dries, you peel it off, and go again.
Different story if it's for finishing/painting of course - but there's another thread here covering all that.
-
5th January 2022, 10:08 AM #3SENIOR MEMBER
- Join Date
- Sep 2013
- Location
- Jarrahdale WA
- Posts
- 370
Cannot see a listing now, but we bought the "tradeflame" type from ebay for about $15 for 100 delivered..
-
5th January 2022, 01:41 PM #4GOLD MEMBER
- Join Date
- May 2009
- Location
- melb
- Posts
- 1,125
How long ago? Cheapest I can find is 100 for $30
What is it about these brushes that you like? Im trying to understand why they are so popular, when paint brushes can be purchased for cheaper
-
5th January 2022, 03:07 PM #5
Probably the stiffer bristles. And the cost. I think I recall seeing a paint brush for 30¢ back in the 1960’s
It's all part of the service here at The House of Pain™
-
5th January 2022, 04:35 PM #6rrich Guest
Here, my local Ace hardware carries them for about $15 for a gross. That price was about 5 years ago as I still have 5 or 6 dozen left from the gross.
Similar Threads
-
laguna C flux/P flux extractors
By havabeer69 in forum DUST EXTRACTIONReplies: 28Last Post: 26th January 2021, 12:39 PM -
Which flux please?
By ptrott in forum WELDINGReplies: 8Last Post: 16th December 2014, 04:30 AM -
Flux Core Vs DC Arc
By blumx in forum WELDINGReplies: 14Last Post: 27th June 2013, 10:49 PM -
Solder Flux?
By Walesey in forum METALWORK FORUMReplies: 5Last Post: 19th June 2007, 05:54 AM