Thanks: 0
Needs Pictures: 0
Results 1 to 6 of 6
-
21st June 2021, 04:30 PM #1GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,018
Giving a pallet a new life: Plant and shoe shelf
The missus frequently asks when I'm "going to make something useful". Apparently garage fit-outs don't count.
We have had a couple of tons of backfill delivered on some hardwood pallets recently, so when she suggested she was going to buy a shoe rack-cum-plant shelf to tidy up outside the front door, I thought it'd be a good time to make that useful thing instead.
Scrappy pallet needed breaking up and de-nailing - I've settled on a few favourite tools for this task after doing umpteen meters of old roofing timbers.
pallet.jpg
Started out looking rough, but tidied up quite nicely. The Hammer A3 is one of my favourite machines. It's so accurate. Dial in 40mm, and it spits out 40mm.
to process.jpg processing the top.jpg processed pile.jpg
I needed to use the larger fence range on the big domino to put some tenons into the top, so I got to use my Seneca bits for the first time. They make an adaptor that allows you to use the DF500 cutters in the DF700 - which makes 4mm dominos possible on the big machine.
seneca parts.jpg seneca in domino.jpg top dominos.jpg
Lining things up, and a chance to prove the new bench's vertical work holding:
lining things up.jpg vertical holding.jpg
Works very well.
Domino glue-ups are always a bit stressful. So many little bits to smear. After this little project, I bought more clamps!
shelf clamp.jpg clamps front.jpg clamps side.jpg
Dominos make good shelf pins too.
domino shelf pins.jpg
Ready for some finishing:
complete - to oil.jpg
Came out pretty nicely. Edges are recycled roof timbers. It's not fine furniture, but it'll do nicely for the job.
complete front kitchen.jpg outside in use side.jpg outside in use front.jpg
And look at how accurately the Kapex makes mitres:
kapex mitre.jpg
-
21st June 2021 04:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st June 2021, 05:03 PM #2GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,044
Yes well there are quite a few dollars worth of tools in evidence there, she was obviously wondering when she was going to reap a reward for her forbearance. It certainly appears that you could use a few more short clamps though - good luck with that.
Although the dimensions are not large you don't think that hard connecting the top to the frame with dominoes will cause any movement problems down the track? If it was an inside piece of furniture I suspect it wouldn't be a concern, but since it has to live outside?
-
21st June 2021, 05:56 PM #3GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,018
Yes, I suspect there'll be some issues down the track - I had to beat it a bit hard to get it all together!
All down to limited experience and making it up as I go along. Be interesting to see how long it lasts.
-
21st June 2021, 06:11 PM #4
-
22nd June 2021, 07:44 AM #5GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,018
This one was pretty good. I had to do a few joins (hooray for the domino again) to get enough 40x40 for the frame, but the wider planks were pretty decent.
If it was an indoor piece (beyond my limited skillz at the moment), I'd have filled the defects with epoxy. I think it would look quite striking with some metallic coloured streaks and spots.
I have another two hardwood pallets to break up once the bulka bags are empty, but they don't look like they'll be quite as nice. Then again, you never know until you make that first jointer cut...
-
24th June 2021, 06:44 PM #6SENIOR MEMBER
- Join Date
- Jun 2009
- Location
- Elizabeth Bay / Oberon NSW
- Age
- 76
- Posts
- 934
Nice looking piece, Bernmc! I like the proportions and the contrasting edges. It's also good to see pics with descriptive labels.
Ditto to Aldav's comments. You might get away with the framed top, I hope so.
mick
Similar Threads
-
Pallet plant stand/table
By DRMS in forum WOODWORK PICSReplies: 3Last Post: 1st October 2014, 01:29 PM -
Arc rod shelf life.
By Optimark in forum METALWORK FORUMReplies: 29Last Post: 13th June 2013, 07:43 PM -
Epoxy Shelf Life
By Superbunny in forum GLUEReplies: 3Last Post: 18th March 2012, 10:23 PM -
Titebond II - Shelf life?
By rhancock in forum WOODWORK - GENERALReplies: 15Last Post: 10th March 2011, 02:23 AM -
Pot plant holder and shelf
By Woody1 in forum WOODWORK PICSReplies: 6Last Post: 20th January 2006, 03:16 PM