Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Glue + Sawdust = Black Filler
-
6th June 2011, 05:19 PM #1New Member
- Join Date
- Mar 2011
- Location
- Brisbane
- Posts
- 9
Glue + Sawdust = Black Filler
This topic has been done a few times, e.g. - here, but looking for some more current advice.
Which glues can be used to mix with sawdust that don't darken significantly? I have tried both Titebond 2 and Araldite with poor results. The texture of the fill is good, but the discoloration obviously negates the purpose of the fill.
It is moisture that turns the mixture black right? I assume it is from the sawdust? Could you possibly bake or heat (don't laugh) the sawdust to remove moisture?
-
6th June 2011 05:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th June 2011, 05:39 PM #2SENIOR MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Posts
- 517
I've never used saw dust, but I've used sander dust with araldite on small holes and it's been fine. On larger holes I've used epoxy with dust.
-
6th June 2011, 06:42 PM #3Member
- Join Date
- May 2009
- Location
- Geraldton
- Posts
- 71
I have had ok results using wests and glue powder then only using enough wood dust to tint the paste
Ben
-
6th June 2011, 10:20 PM #4
i have used sawdust and super glue to fill smaller holes in my turnings and also with some small joint gaps in joins. I usually fill the holes with dry material then put some super glue on it to make it solid
Regards Michaelenjoy life we are only here a short time not a long time
-
7th June 2011, 09:02 AM #5Senior Member
- Join Date
- Nov 2006
- Location
- kansas mostly
- Posts
- 163
If the spot to fill isn't too big, I've had success with hide glue and sanding dust or saw dust (get a different texture/look with different dusts).
ron
Similar Threads
-
Making your own filler from sawdust
By Gary Carter in forum HINTS & TIPSReplies: 16Last Post: 12th September 2009, 12:27 AM -
Wood Flour verses Bote-Cote fillet & glue filler powder
By Ironbarkbob in forum BOAT BUILDING / REPAIRINGReplies: 7Last Post: 30th August 2009, 08:23 PM -
Sawdust at 70 below
By Groggy in forum Links to: WEB SITESReplies: 2Last Post: 5th January 2006, 09:19 PM -
Black Epoxy - crack filler
By SteveI in forum FINISHINGReplies: 5Last Post: 12th March 2004, 05:09 PM