Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: gluing up a panel
-
1st February 2009, 07:51 PM #1New Member
- Join Date
- Nov 2008
- Location
- Melbourne
- Posts
- 5
gluing up a panel
First things first, Hi, this is my first post.
I was hoping someone could give me some tips on how ot successfully glue up a panel. I'm gluing some up for a coffee table i'm working on and they are turning out quite uneven.
I was hoping for some advice on either how to get a flat surface on them after an unsuccessful glue-up. Or some advice on how to get it right in the first place.
Thanks in advance.
Rollo
-
1st February 2009 07:51 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st February 2009, 09:06 PM #2
Rollo
The commonist mistake is to have all the clamps below the panel. You need to alternate the clamps so that every second clamp is either above or below the panel.
There is debate as to how to arrange the boards but most would probably say growth rings up alternating with growth rings down.
Check that the panel is flat with a straight edge after clamping.
You can also clamp some wooden bars together that are placed above and below the panel and across the glued boards.
-
1st February 2009, 09:46 PM #3Intermediate Member
- Join Date
- Jan 2007
- Location
- Taylors Lakes
- Posts
- 41
Making a flat top
use the search facility and search for"making a flat top" by Wongo on 6/12/07.
Nice clear instructions with pictures to help. A great resource I always used to start with.squizz
Similar Threads
-
Gluing in Pen Tubes with CA
By Fireguard in forum WOODTURNING - PEN TURNINGReplies: 15Last Post: 25th July 2008, 09:28 AM -
Gluing Glass Together
By kkperth in forum SHARPENINGReplies: 3Last Post: 7th April 2008, 08:49 AM -
Awkward gluing job....
By R. McCarthy in forum WOODWORK - GENERALReplies: 11Last Post: 9th March 2007, 10:52 AM -
gluing red gum
By benswoodwork in forum WOODWORK - GENERALReplies: 4Last Post: 4th December 2006, 03:33 PM -
Panel gluing aids
By niki in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 5Last Post: 15th April 2006, 09:35 AM