Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Jamming drawers
-
28th October 2002, 07:20 PM #1New Member
- Join Date
- Oct 2002
- Posts
- 2
Jamming drawers
I have just built my first ever drawers. They are in a sidetable. The drawers are hard to push in because they wobble very slightly and jam on alternative sides, until they are about half way in, then they slide the rest of the way without jamming. The drawers have a top and bottom rail as guides.
Is there a cure for drawers than jam in this way?
-
28th October 2002 07:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
-
28th October 2002, 08:11 PM #2SENIOR MEMBER
- Join Date
- Aug 2002
- Location
- Lakehaven, NSW, Australia
- Age
- 57
- Posts
- 995
Got a wood fired heater??
A little more seriously - if the gap is not too bad, you could try beeswax on all the mating surfaces, either from a candle or preferably a paste wax. Any hardware store should carry it. If the gap is more than a couple of mm, you'll need to close it up somehow - shims on both sides made from preferably a slippery material (laminate, nylon, plastic etc) might work.
Congrats on the first drawers by the way I tend to use metal/roller self closing drawer slides myself - much nicer sliding action for my money.
The Australian Woodworkers Database - over 3,500 Aussie Woods listed: http://www.aussiewoods.info/
My Site: http://www.aussiewoods.info/darryl/
-
29th October 2002, 09:46 AM #3Member
- Join Date
- Jan 2001
- Location
- Shanghai, People's Republic of China
- Age
- 66
- Posts
- 56
Hey Don, Are you the Don Driscoll formerly of BHP?
Peter
-
31st October 2002, 10:08 AM #4
Having tried soap & beeswax for timber lube in similar situatuions i was converted to drilube sticks by my brother who works in the automotive industry.
Drilube is available at most auto accessory stores.
It seems to lube better than the others & doesn't seem to glue the runners together in hot times like bees wax can.
comes in a convienient stick too.Any thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
31st October 2002, 11:56 PM #5
Ferget th beezwax an sope. Use a plain old ordinary every-day candle. Paraffin wax is what you need. A great lubricant. Has worked on sticky draws for ever.
KEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
Use the Report icon at the bottom of all Posts, PM's and Blog entries.
-
3rd November 2002, 08:16 PM #6
Also check the humidity in the area where it's placed that may also be a contributing factor since being built in your workshop!
Cheers
------------------
JohnnoJohnno
Everyone has a photographic memory, some just don't have film.