Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
18th July 2010, 04:37 PM #1New Member
- Join Date
- Jul 2010
- Location
- melbourne
- Posts
- 1
hanging wall murals temporarily on masonite wall
We want to hang wall murals that are around 16x9 feet. They are wallpaper but I am not sure what material to paste them on. They will be hung as one piece on a wall made from Masonite sheeting. We need to be able to change them over frequently and make sure they are not going to fall on some little kids head too! Any ideas on what material to use and how to attach them would be greatly appreciated. Thankyou
-
18th July 2010 04:37 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th July 2010, 12:30 AM #2Senior Member
- Join Date
- Jun 2010
- Location
- Arkansas USA
- Age
- 85
- Posts
- 169
Those devices with the stretchy-sticky substance seem to work very well. I don't understand how but they work.
I don't know if you have them down-under, we have in the U.S. My wife just bought some and says they are made by Scotch, the tape people.
-
20th July 2010, 01:00 AM #3
My initial thoughts are make up a double sided masonite panel and attach a mural to each side.to control warping
16' x 9' will be more than a handfull to handle and it may pay to add a frame of some sort -- if you do you can hang the murals by screwing through the frameregards from Alberta, Canada
ian
-
20th July 2010, 09:52 PM #4
A "standard" sheet of Masonite (1/8" x 4' x 8') weighs about 19 lbs. Each face 16' x 9' requires 4.5 sheets, for a weight each face of 85.5 lbs. Two faces thus weigh 171 lbs. To this you must add the weight of internal framing, which is needed to "marry" the sheets if nothing else; say 10 lbs. Then add the weight of the wallpaper itself, both faces of course.
Some questions now arise.
Can the existing Masonite wall support this weight? Engaging the wall's studs would be more reliable.
Whose wall is it?
How frequently will the murals be changed?
Where will you store the unused murals?
And how will you move them to and fro? Truck transport may need a special permit, because of their size.
A lighter weight substrate might be "Coroplast" ("Corflute" in Australia, and apparently dealers in Melbourne). This is an extruded cellular plastic, mostly used in the sign industry. With judicious planning, standard sheet sizes can be employed. It generally resists adhesive, but the dealer may be able to advise otherwise. (I've just now learned (via Google) that Sikaflex-11FC may be usable). And in spite of adhesive resistance, double-faced carpet tape might overwhelm the resistance by force of a large surface area.
As to the murals being unwieldy, I would consider breaking them into segments, if the joint lines would be acceptable.
Cheers,
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
20th July 2010, 10:27 PM #5
-
20th July 2010, 11:24 PM #6
Well, they started with feet, so I guessed the "foreign" language would be OK.
You're right about fitting inside a truck, Ian, but it has to be on the diagonal. In one of my previous lives, we shipped oversize precast concrete panels on sloping frames on a lowboy or flatbed, to fit within allowable dimensions.
Cheers,
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
21st July 2010, 12:02 AM #7
Hi Joe
here what I consider a "standard" covered truck has a similar internal height to a 10 ft high container.
and it's pretty easy to find a truck that has an approx 11ft internal clearance
either truck should fit a 9' mural, including it's transpoprt box.regards from Alberta, Canada
ian
Similar Threads
-
Hanging Project on Wall
By antonylord in forum WOODWORK - GENERALReplies: 5Last Post: 20th July 2009, 01:14 AM -
Hanging a Wall Cabinet
By Slavo in forum WOODWORK - GENERALReplies: 10Last Post: 31st May 2005, 03:11 PM