Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Help finishing live edge slab
-
1st August 2020, 01:33 PM #1New Members
- Join Date
- Aug 2020
- Location
- Sydney
- Age
- 27
- Posts
- 1
Help finishing live edge slab
Hi,
I currently working in a big live edge slab table, but struggling to decide how to finish it. I would like to keep the live edge as intact as possible, but as you can see it was previously varnished with a really ugly stain. Does anyone have suggestion how I can remove/sand back the stain while keeping the woods natural character as much as possible?
-
1st August 2020 01:33 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st August 2020, 05:18 PM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,791
Soft wire wheel on an angle grinder, light strokes in the direction of the grain ONLY, don't dwell too long in one spot, practice first - LOTS.
edge.jpg
By soft wire wheel I mean one like this.
Screen Shot 2020-08-01 at 2.17.22 pm.jpg
Not the thick gnarly twisted wire brushes used for deep crusty rust on metal.
Similar Threads
-
Help: Live Edge Slab Gaps Filled With Epoxy Resin, Now How to Finish?
By nzhorsey in forum FINISHINGReplies: 9Last Post: 21st April 2019, 03:24 PM -
finishing live edge spotted gum slab for outdoor vanity
By kerrie_t in forum FINISHINGReplies: 7Last Post: 1st September 2017, 04:53 PM -
Joining live edge Marri\Redgum Table legs to Slab
By Btalmage in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 4Last Post: 23rd December 2014, 04:32 PM -
First live edge table
By centron-sg1 in forum WOODWORK PICSReplies: 8Last Post: 23rd November 2014, 09:24 AM -
Finishing live edge table?
By ciscokid in forum WOODWORK - GENERALReplies: 1Last Post: 5th November 2007, 09:47 AM