Thread: Help - triton multi tool

From: https://www.tritontools.com/Helpers/...985_Manual.pdf (please check to make sure this is the right manual/version)

Fitting a blade or scraper
1. Lift the Quick Release (1) and push forward to disengage the clamping
mechanism
Note: This requires some strength.
2. Fit a compatible blade or accessory to the Accessory Mounting (11) (Fig. I)
3. Ensure the correct orientation of the blade or accessory on the Accessory
Mounting so it faces the required direction
4. Secure the blade or accessory with the Quick Release Bolt (9) and return the
Quick Release to the closed position
Note: Blades or scrapers that are cranked or bent must be mounted on the tool so
that the end of the blade sits facing away from the machine

This is an excerpt from page 8 using the above link.

I note "This requires some strength"... is it possible you're being too gentle?

Thanks.
The issue here is that the diagram implies that the clamping bolt can be removed, for when the accessory won't fit over it (some have an access 'slot', and some just a 'hole'.