Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Help with wood selection
-
5th June 2014, 02:47 PM #1New Member
- Join Date
- Jun 2014
- Location
- Australia
- Posts
- 3
Help with wood selection
Hi, Forgive me I am new at this. I would like to make some simple kitchen chairs for home and I have found some plans but I am unsure what wood to use. As this is my first project and the chairs are very basic and they will be painted white to match our current kitchen table.
Can I use non structural pine or am I way off.
-
5th June 2014 02:47 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th June 2014, 08:18 PM #2
You will get a better answer if you are also able to show your plans.
The only chair I have made used plain 19mm pine, ply and two pieces of hardwood, (could have used pine) to support the back.
I will go out on a limb, having not seen the plans or the likely weight of the end user and say yes, but just watch for knots and anything else that might be a weakness.
-
6th June 2014, 01:07 AM #3
Without seeing your plans, or knowing the users weight/propensity to rock back on a chair, using non-structural pine is likely to end in tears.
as a first project a chair will likely have a very steep learning curveregards from Alberta, Canada
ian
-
6th June 2014, 12:46 PM #4New Member
- Join Date
- Jun 2014
- Location
- Australia
- Posts
- 3
Thanks for the comments. This is the chair I was considering making http://ana-white.com/2011/01/classic...de-simple.html
It looks relatively straight forward.
Similar Threads
-
need advice one second wood selection
By jaredlacey in forum BOX MAKINGReplies: 3Last Post: 25th May 2012, 09:54 AM -
Advice on wood selection
By wilier in forum WOODWORK - GENERALReplies: 1Last Post: 14th April 2012, 01:57 AM -
Need assistance for wood selection
By BenBrown in forum WOODWORK - GENERALReplies: 2Last Post: 24th March 2011, 02:03 PM -
Wood Selection in USA for a GIS
By Rickd in forum Michael Storer Wooden Boat PlansReplies: 66Last Post: 18th February 2010, 10:59 AM -
Best wood from this selection?
By jefferson in forum WOODTURNING - GENERALReplies: 8Last Post: 14th August 2008, 02:30 PM