Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
28th March 2013, 10:38 PM #1
Hey Chambezio does the sawhorse article come with pictures
https://www.woodworkforums.com/f11/pe...-horse-155870/
Rod do you have the pictures that go with the article in the link above. Alternatively what mag, issue page etc so i can look for it?
Thanks
Paul
-
28th March 2013 10:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th March 2013, 09:12 AM #2
Yes please Rod, I'd like a look to thank you.....Cheers, Crowie
-
3rd April 2013, 01:12 PM #3
-
3rd April 2013, 01:54 PM #4
Australian Woodworker Magazine has the article. Yeh sorry about the photos I thought that were linked to the text and it would have followed automatically. I can dig them out of the library file and see if I can get it to work.
There was an American show on the other day, NICS, Gibbs was at his project boat in the cellar and he dragged this very ugly and elementary saw horse out to sit on. I am sure our Australian designed ones are a lot more elegant
Give me a about an hour because I am just doing the washing up (welcome to the real world!!)Just do it!
Kind regards Rod
-
3rd April 2013, 02:10 PM #5
Here Are The Missing Photos
You should be able to work out where they go
Just do it!
Kind regards Rod
-
3rd April 2013, 02:15 PM #6
Here is the finished article and a warning not to leave them alone unsupervised
The way this system works never ceases to amaze me. I just clicked onto my files then the info is picked up and into the Forum in a flash!!! I'm old fashionedJust do it!
Kind regards Rod
Similar Threads
-
Sawhorse plans?
By Waldo in forum DESIGNS & PLANS FOR PROJECTSReplies: 23Last Post: 2nd April 2018, 03:55 PM -
Met (rod) chambezio in tamworth
By checkerflight in forum TABLE SAWS & COMBINATIONSReplies: 0Last Post: 26th January 2013, 01:17 PM -
Antique Sawhorse - any ideas?
By genuine in forum WOODWORK - GENERALReplies: 3Last Post: 3rd January 2011, 11:52 AM -
Article
By John Saxton in forum WOODTURNING - ORNAMENTAL TURNINGReplies: 2Last Post: 16th April 2001, 09:08 PM