Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Which hole saw to get?
-
2nd August 2020, 08:00 PM #1Novice
- Join Date
- Apr 2020
- Location
- Victoria
- Posts
- 13
Which hole saw to get?
When I first started renovating, i got this hole saw for making a hole for my door locks. Worked well and its used will a cordless drill.
Sutton Tools 8 Piece Multi-Purpose Carpenter Holesaw Set | Bunnings Warehouse
Didnt get the set but just a single piece, the size i need.
I also see other types with different cutting edge and i wonder will they still cut through wood well?
Lenox 8 Piece Electrician Speedslot Hole Saw Set | Bunnings Warehouse
If they made the cutting edge different there must be a specific use for it. I dont know which ones to invest in if i buy. Just got a bench drill too.
I primarily use these for wood only.
Or should I just use forstner bits if i want to cut a through hole? I guess it will work for bench drill but too unstable for handheld drill?
-
2nd August 2020 08:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd August 2020, 09:20 PM #2
The Sutton uses TCT teeth and will cut through abrasive materials such as fibro sheeting. The Lennox uses hardened steel teeth with will cut through steel. Either will cut wood; neither will cut particularly smoothly.
Brad pointed bits produce the cleanest holes up to about 1/2”, above that then forstner bits but if you don’t need smooth bored holes then spade bits, speedbore bits and old fashioned irwin/scotch/jennings auger bits are fine and usually cheaper.
Almost any bit can be used in a hand drill but a drill press will always give a cleaner hole.Nothing succeeds like a budgie without a beak.
-
4th August 2020, 08:13 AM #3
Similar Threads
-
hole saw without the pilot hole
By qwertyu in forum WOODWORK - GENERALReplies: 5Last Post: 10th March 2020, 08:27 PM -
Hole in one
By Dalboy in forum WOODTURNING - GENERALReplies: 3Last Post: 7th July 2019, 09:54 AM -
Drilling large hole over small hole or vice-versa
By niki in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 28Last Post: 2nd November 2007, 08:32 PM -
Hole saw
By vin in forum HAND TOOLS - POWEREDReplies: 1Last Post: 12th April 2006, 04:16 PM