Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Inlay Banding
-
23rd January 2018, 12:44 AM #1
Inlay Banding
Normally I'm a wood turner, but I've been hanging around that PowderPost fella, so I have to use a glue bottle. Nursing a problematic shoulder / collarbone injury so my GP has advised no strenuous work and "activity modification." So it's making some inlay banding for future projects. This is my first attempt at making inlay banding, started off with small proof of concept blocks around 130 mm x 35 mm, all cut on a table saw using sleds. Largest so far are 450mm long x 90mm wide & a little over 10mm thick (on the bottom). I won't slice these until I require the banding.
GDW-Inlay-Banding-stack.jpgMobyturns
In An Instant Your Life CanChange Forever
-
23rd January 2018 12:44 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
Similar Threads
-
How to make inlay banding fit?
By Dengue in forum BOX MAKINGReplies: 14Last Post: 2nd August 2015, 08:12 PM -
inlay/banding
By ninpoman in forum WOODWORK - GENERALReplies: 1Last Post: 23rd November 2013, 09:10 AM -
Walnut box with banding inlay
By ajw in forum BOX MAKINGReplies: 6Last Post: 26th December 2011, 04:08 PM -
Inlay banding production book
By powderpost in forum MARQUETRY and INTARSIAReplies: 6Last Post: 31st August 2005, 11:40 PM -
Inlay Banding
By Termite in forum WOODWORK - GENERALReplies: 11Last Post: 6th December 2004, 09:05 PM