Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
12th February 2012, 09:11 PM #1New Member
- Join Date
- Feb 2012
- Location
- Perth
- Posts
- 1
Where to have Jarrah timber cut into simple boards? (Perth area)
Perhaps you can point me towards a cutting service in/around Perth that allows me to do the following:
I got some Jarrah timber directly from a tree that I seek to have cut into simple boards which I then have polished or even finish myself at home. The diameter is about ~20-25cm and the piece is roughly 30cm long. So perhaps 15 or so boards.
Who is able to do this economically, and roughly what costs am I looking at?
Thank you very much for your advise!
-
12th February 2012 09:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th February 2012, 10:21 PM #2
Join your local mens shed and do it yourself on their bandsaw. They will help you if you've never done it before.
-
13th February 2012, 10:44 AM #3
I think you are over estimating how many boards you will get from that small branch
You have not allowed for sapwood and saw kerf, I would think that you should get , maybe 8 to 10 pieces max , remember that after cutting , you will have to run them through a thicknesser and clean them up.
Jeff
VK4
Similar Threads
-
Lathe teacher wanted - Perth area
By ds2006 in forum METALWORK FORUMReplies: 4Last Post: 23rd November 2010, 08:20 AM -
Looking for a mentor in Perth area to help with cedar swing seat project
By bammo in forum WOODWORK - GENERALReplies: 3Last Post: 27th October 2010, 10:34 PM -
Kayak Timber around Perth area?
By Awol in forum BOAT RESOURCES / PRODUCT SEARCHReplies: 5Last Post: 4th October 2009, 05:13 PM -
Free Jarrah timber mainly 4x2's - Perth
By col5555 in forum WOODWORK - GENERALReplies: 1Last Post: 1st August 2009, 06:37 PM -
Free Jarrah timber - Perth
By col5555 in forum TIMBERReplies: 3Last Post: 17th January 2009, 05:17 PM