Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Joint gap filling suggestions
-
27th September 2013, 02:27 AM #1New Member
- Join Date
- Sep 2013
- Location
- Melbourne
- Posts
- 2
Joint gap filling suggestions
Hi, I have made a record shelf from vic ash and it was a long and tiresome process. Basically it consists of two rectangular boxes hand dovetailed on all corners (it's 45mm thick), the rectangles are then cross-half-checked into each other at 30degrees to make a big x shape. Stupidly I didn't think ahead and consider that the records on the lower side would be ruined from the compression so I routed a groove top and bottom and slotted in two lengths of spotted gum decking board (one for front and back) which i had laying around to divide each arm of the x into 100mm wide sections. Over time, gaps have opened up in the joins between the light and dark timber. I guess each has a different reaction to changes in moisture content. Does anyone know of a suitable product to fill the gaps and stop this from recurring next winter without noticeably standing out on either of the contrasting coloured timbers? Let me know if that's^ confusing and I will post a pic. Cheers, Brendan.
-
27th September 2013 02:27 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th September 2013, 03:45 AM #2New Member
- Join Date
- Sep 2013
- Location
- Melbourne
- Posts
- 2
Here's a pic before the divisions
-
28th September 2013, 10:24 AM #3GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,559
An old tradesman once told me, " All gaps should be filled with the person who made them."
But seriously, the chances of a repeat performance, a year down the track, would be highly unlikely. The unit has now had time to settle in and the moisture content in the timber would have equalized to the room. Any matching filler should be fine now.
Similar Threads
-
Filling a Gap
By joe greiner in forum WOODTURNING - GENERALReplies: 12Last Post: 8th December 2009, 09:14 PM -
Joint suggestions
By Tools in forum WOODWORK - GENERALReplies: 1Last Post: 5th January 2009, 03:30 PM -
Mitre joint with biscuit joint
By hsc07ww in forum WOODWORK - GENERALReplies: 4Last Post: 30th November 2006, 10:10 AM -
Filling Gaps in Sliding Dovetail Joint?
By lyptus in forum HAND TOOLS - POWEREDReplies: 4Last Post: 26th May 2006, 06:28 PM