Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: What joints for a display box??
-
2nd September 2007, 11:16 PM #1Senior Member
- Join Date
- Aug 2007
- Location
- Wynnum Qld
- Age
- 76
- Posts
- 113
What joints for a display box??
Hi all,
Hoping someone with more knowledge on joint strength than me can assist - I've got lic lic.
I wish to build 10 450mm cubes out of 32mm MDF with two opposing sides open. Does that make sense? They are for display stands to use in a pool shop and will only have small and light items on them. When finished they will either be painted or covered with laminex.
Any ideas welcome and thanks in advance!!Cheers
Baz
-
2nd September 2007 11:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
2nd September 2007, 11:26 PM #2
if you are going to laminate them then use 18mm mdf and screw it together with glue will be fine if painting depending on how picky you are...
you will see the joint if paint it... so you might need to mitre it biscuits and glue with mitre hope that helps 32mm is a bit of over kill in my opinion..
hope that helps and it will also cost you 3times as much and be 3 times as heavy...if you use 32mm
-
3rd September 2007, 02:14 PM #3
-
3rd September 2007, 04:54 PM #4Senior Member
- Join Date
- Aug 2007
- Location
- Wynnum Qld
- Age
- 76
- Posts
- 113
Thanks guys - what I needed to know.
I also thought that 32mm is over kill but it is for appearance sake not strength. What the son's franchiser wants in all the franchise's shops - you know uniform design and appearance.Cheers
Baz
Similar Threads
-
Box joints with Incra LS system
By Thornburn in forum WOODWORK PICSReplies: 6Last Post: 25th June 2007, 09:01 AM -
What Is The Easiest Way To ..
By echnidna in forum BOX MAKINGReplies: 19Last Post: 9th May 2007, 12:20 PM -
When is a box a BANDSAWN BOX
By baxter in forum BANDSAWN BOXESReplies: 26Last Post: 3rd January 2007, 10:13 PM -
Box Makers Mystery Swap
By Sculptured Box in forum BOX MAKINGReplies: 41Last Post: 27th September 2006, 11:35 PM -
Box Mitre Joints
By Eowyn in forum TRITON / GMCReplies: 5Last Post: 26th August 2002, 09:48 AM