Thread: Lesson Learnt

Scary stuff.

Good to hear your o.k.

Plenty of ugly OH&S pictures at work to remind me to always think safe and always wear eye protection. Luckily for me i'm a permanent 4 eyed operator so glasses is one thing i dont need reminding to wear.

Still, things like this are definitely a wake up call (so is my uncles missing finger thanks to his router).

jugglingogre,

how thick was ya peice of timber?
Being a mobile sawmiller I come across trash in timber all the time, most times hardware in timber has a terrible blackening effect on the timber. it almost speaks to me now, goading me, daring me to bring my TCT near it

Glad to hear you escaped.

This is the reason I ALWAYS, ALWAYS wear eye protection whenever I operate ANY machine. Even if I'm only making one small cut. I figure it's worth the extra couple of seconds it takes to put them on.

Although there may be no visible damage, one of the tips may be damaged. A projectile tip is not a nice thing to catch. One of the reasons I always wear full face protection.

Over the years I've copped the odd bit of debris in the face.
Some hurt even when wearing glasses
Nowadays I always wear a full face mask on the saw, lathe or router table

I don't believe eye protection alone is enough, always wear a full face visor. They are so much nicer, more comfortable and far easier to use. Once you try it you won't go back.

The face mask is now on my list of things to buy. As is a dust filter. Just waiting for some more money to be released to me so I can buy them.

We are saving for a house but after last nights escape I think SWMBO will come to the party on the safety gear.

One day I'll have a real workshop not a cubby house that I stole from the munchkins...

George Taylor Stores had twin cartridge masks for $19 a few months ago.
They fit ok under a full face gardening mask

A very sobering post. Goes to show what powerful machines we use, thinking we're in control of.

I use a stud detector as a metal detector for recycled timber, and does a good job: certainly picked up some bits of metal that I would have missed by eye.

Doesn't a full face mask tend to fog up if you breathe on it?

Originally Posted by echnidna

George Taylor Stores had twin cartridge masks for $19 a few months ago.
They fit ok under a full face gardening mask

Hey thanks for the tip. I'll check out GT's when I go into town on Monday for a study break (exam on Thurday):eek: .

I looked in the local hardwares during the week and it was upwards of $50 bucks for the dual cartridge masks and that was the base model.

Originally Posted by zenwood

Doesn't a full face mask tend to fog up if you breathe on it?

No, just the opposite, it has a lot of air flow all round as it soesn't seal on the face at all. All those who wear glasses should use them as the glasses don't fog up at all. That was the reason I originally went to them though now I wear contacts but I still wouldn't change back. There are some that incorporate both eye and dust protection but I have never used those.

Sigidi

It was some laminated pieces of hardwood scrap that I was shaping to turn into a cutting board for a Christmas pressy for one of the outlaws or possibly my sister depending on how it turns out

There shouldn't have been any nails in the pieces I was cutting as it used to be the slats from a futon bed that I was recycling.

All I can say is shoddy manufacturing by the person who made it.

I had looked over the wood before I laminated it together to form the larger widths but this one must have been a snap off at one stage or another.

Doesn't matter now other than my saw and I are fine.

After thicknessing a staple last week (fortunately no damage) I tested one of the rare earth magnets I use to set the jointer table to see if it would detect the staple. Sure did, no problems. This was one of those thin wire staples that had been used to staple carpet, so it was pretty small, but the magnet grabbed it as I moved it over the wood. That's what I'll be doing with any reclaimed timber from now on.

We've had a string of horror stories in the last few weeks, good to hear you are in one piece and not leaking.

carefull chaps.