Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
21st May 2008, 05:48 PM #1New Member
- Join Date
- May 2008
- Location
- Perth
- Posts
- 1
Makita 2012 Fitting a new Poly V belt
Hi everyone - Have bought a Makita 2012 thicknesser. Seems to be in good shape, and I got it for a reasonable price. I need to replace the disposable blades and the poly v belt . (Price for parts will be about $110.) Process for fitting the blades is clear, but there's nothing in the manual about replacing the belt. Checking other machine manuals on line it appears that removal involves simply sliding the belt towards yourself while rotating it...by hand!! Installation is the reverse.
Am I on the right track?
Thanks
Loun
-
21st May 2008 05:48 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st May 2008, 07:16 PM #2
Mate, I've had to replace the drive belt on thicknessers and its a bloody hard job, all I can say is don't put the belt in hot water - it doesnt work.
You could use a screw driver to help get in onto the wheels,??
-
11th June 2012, 03:58 AM #3New Member
- Join Date
- Jun 2012
- Location
- Edinburgh
- Posts
- 1
Rather than use screwdrivers to lever your new poly V belt on to your easily damaged multi grooved pulley wheel, fit the belt to the top (small) pulley wheel, then fit to the lower as far as possible. Beyond this point, turning the lower pulley wheel causes the half fitted belt to slip, and mild cursing, right?
Has your lower pulley wheel got a raised rim, formed by the shaft nut recess? I bet it has.
Now - and this is the clever bit - clamp your belt to this rim using very small mole grips at the point where it is coming off the pulley wheel and carry on turning the pulley wheel.
I fitted a belt that looked to be 1/2 inch too small this way.
Richard.
Similar Threads
-
makita 9404 belt sander tracking problem
By offuscate in forum HAND TOOLS - POWEREDReplies: 9Last Post: 24th October 2007, 03:28 AM -
Old Makita Belt Sander
By LenS in forum HAND TOOLS - POWEREDReplies: 8Last Post: 19th January 2007, 01:32 AM -
1:) Danish with poly and 2:) Poly over white/hard shellac ?
By barryr in forum FINISHINGReplies: 6Last Post: 6th August 2005, 02:11 PM -
Makita Belt sander thingy
By DaveInOz in forum HAND TOOLS - POWEREDReplies: 4Last Post: 17th March 2003, 09:48 AM -
Makita M992 Belt Sander
By Bernie Summers in forum HAND TOOLS - POWEREDReplies: 1Last Post: 9th October 2000, 07:10 AM