Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Merbau - Bar Benchtop
-
2nd November 2019, 02:04 PM #1New Member
- Join Date
- Nov 2019
- Location
- Melbourne
- Posts
- 2
Merbau - Bar Benchtop
Hi All - Im new here.
I just finished a big merbau decking project, and now im building an outside bar - which i want to use offcut decking as the benchtop. Ive biscuit joined the lengths together, but im not sure whether i should have wet the lengths down first to bleed them out prior, or, do it before laquering it?
All opinions welcome.
-
2nd November 2019 02:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd November 2019, 03:27 PM #2
Should not be a problem if the bar is undercover and not going to be out in the rain. I built a merbau deck and as instructed I hosed the deck down a few times before oiling and you could see the tannin coming off. I have also used merbau for vice jaws in the shed and being dry all the time no problem with leaching.
Regards
John
-
2nd November 2019, 07:18 PM #3New Member
- Join Date
- Nov 2019
- Location
- Melbourne
- Posts
- 2
Thanks. Ill wipe down with a wet rag to remove surface tannins before coating.
-
2nd November 2019, 07:47 PM #4Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,469
You can use a solution of Napisan to help remove tannins.
Similar Threads
-
new merbau deck, laminated merbau-does it need to be weathered?
By jods in forum FINISHINGReplies: 7Last Post: 21st July 2009, 11:15 AM -
Merbau Bed
By Hermes in forum WOODWORK - GENERALReplies: 5Last Post: 23rd February 2009, 06:23 PM -
Is Merbau OK?
By Rob from Kew in forum WOODWORK - GENERALReplies: 7Last Post: 22nd February 2005, 12:12 PM