Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Mosaic Table Base - Design?
-
12th January 2006, 01:46 PM #1
Mosaic Table Base - Design?
SWMBO is creating a 60cm square mosiac table with a geometric design and she's asked me to make the base.
Most mosaic tales you see have these insectile cast iron bases like the one below.
To me they make the table look a bit tippy. Has anyone madea timber base for this type of table before? What are some of the design considerations, proportions, material weight taken into account?
Pedestal or 4 legs? Ahh!
Cheers,
Adam
------------------------------------------
I can cure you of your Sinistrophobia
-
12th January 2006 01:46 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
12th January 2006, 10:19 PM #2
Gidday Lefty
I'd go pedistal the whole purpose of the insectile legs is so that the table top is the feature
Good luck with it and keep us posted
REgards louJust Do The Best You Can With What You HAve At The Time
-
13th January 2006, 12:14 AM #3GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
I'm in the throws of making a table top for a friend (OK, I've been stalled for a year or so) so she can put a mosaic on it.
The base unit is one of those 'cast iron' Market Umbrella stands. The top is 2x12mm disks of ply (salvage from Council cleanup) that will be epoxied all over, then attached with screws to a block of hardwood, say 100x100x45, with a 30mm hole for a hardwood dowel upright. The block will have a saw cut on one side to the central hole & a cross bolt fitted so the block can be tightened around the dowel, but the dowel can be removed is necessary for storage in future.
-
13th January 2006, 07:17 AM #4
Mine are also on iron legs but only until I work out a good design in wood.
Similar Threads
-
Design Problems with the Triton Router Table (2001) - RTA300
By barrysumpter in forum TRITON / GMCReplies: 19Last Post: 19th November 2018, 08:43 AM -
Challenge to design Ultimate Cutting/Finishing TAble
By NewLou in forum WOODWORK - GENERALReplies: 9Last Post: 25th April 2005, 08:43 PM -
Review: Veritas Router Base Plate from Lee Valley
By silentC in forum ROUTING FORUMReplies: 15Last Post: 20th August 2004, 09:17 AM -
GMC Router Table Design Error
By HarryM in forum ROUTING FORUMReplies: 8Last Post: 16th August 2004, 02:22 AM -
Fixing Table tops to Table Base
By Warrigal in forum WOODWORK - GENERALReplies: 6Last Post: 29th January 2002, 12:29 PM