Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
-
12th July 2023, 10:19 AM #1I now have 3 sheds
- Join Date
- Aug 2010
- Location
- Soldiers Point, NSW
- Age
- 60
- Posts
- 185
Northern silky oak for fishing reel repair
Hi all
I'm trying to source some northern silky oak to repair damage to an old 'Perfect' brand fishing reel spool, circa 1920's to 1930's. The photos landed in the wrong order but the third one shows the reel spool as originally found while the first two show it after sanding. The spool itself is 4" in diameter.
P1000631.jpgP1000622.jpgP1000579.jpg
My plan is to remove the damaged sections by routing a trench then glue in a matching piece of NSO on each side. One trench will be shallow but the trench on the other side will be deeper. I did buy some NSO knife handle scale blanks off ebay because that was all I could find in NSO. Unfortunately I can't match the end grain orientation as shown in the side view without cutting and laminating the scale blanks several times. Ideally I would like to cut the desired replacement piece from a single block to match the end grain. I'm not trying to hide the repair but would like it to blend in.
Google has not been my friend in trying to source some NSO as it appears to be very scarce as say turning blanks or similar. Does anyone have recommendations as where I may obtain some NSO to suit.
I did briefly consider turning a new spool but (a) I couldn't find any NSO turning blanks, and (b) I would have absolutely no hope in removing the brass rim (shown below) from the bottom of the old spool with buggering it up completely and re-fitting it to a new spool, and (c) then it wouldn't really be an original Perfect fishing reel.
P1000575.jpg
Thanks in advance (hopefully)
Twosheds
-
12th July 2023 10:19 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
12th July 2023, 10:48 AM #2
What size are you after. I happen to have a piece about 3”x2” and about a foot long if that suits you, just have to find it in the shed.
Cheers
DJ
ADMIN
-
12th July 2023, 11:36 AM #3I now have 3 sheds
- Join Date
- Aug 2010
- Location
- Soldiers Point, NSW
- Age
- 60
- Posts
- 185
That would be pretty good for size. Thanks DJ.
-
12th July 2023, 04:24 PM #4
My late father was an Alvey wooden reel fanatic and had a series from small trout reels to quite large surf reels - all from Australian red cedar, I think.
I saw him make several repairs over the years, similar to yours, some much worse. His technique was to hand cut a dovetail shaped trench, and to enlarge it until all damaged wood disappeared. (He did not have a router.) He then cut a matching tenon being careful to align the grain - a few tenons got rejected. When satisfied, he epoxyed the tenon in place.
Then he gave the reel to a friend who had a lathe and he truned the reel under very strict instructions not to peel away any of the original reel. He then spent a couple of weeks wet sanding the reel with two pack estapol up through the grits until he had a mirror finish. A coat of wax polish and off fishing.
He was certainly addicted to those classical wooden reels!
PS: Dad always insisted that the dovetail tenons were stronger, but I sometimes wondered if it was about skiting rights - they did look good against the compound curviture of the reel.
-
12th July 2023, 08:14 PM #5
-
12th July 2023, 08:26 PM #6GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Townsville. Tropical Nth Qld.
- Posts
- 1,244
If it doesn't work out for you I can supply a blank the size you want.
Rgds,
Crocy.
-
13th July 2023, 09:44 AM #7I now have 3 sheds
- Join Date
- Aug 2010
- Location
- Soldiers Point, NSW
- Age
- 60
- Posts
- 185
Thanks all.
A dovetailed repair would look pretty classy. Problem is my hands would be shaking so much in fear of stuffing the spool that in all likelihood I would make an irreparable mistake.
But that has now got me thinking of a couple of old alvey cedar spools sitting in the spares box that have some damage - they could be the test dummies. Bugga - looks like I'm headed down another rabbit hole.
Regards
Twosheds
-
15th July 2023, 12:30 PM #8
Ok I found it, some of it has water stains from sitting in a bucket and a leak in the roof
Anyway, it is 70mm x 40mm x 530 long with 250mm clear of water stains.
I can cut it at 250mm for you if that will suit you.
IMG_3529.jpgCheers
DJ
ADMIN
-
15th July 2023, 06:39 PM #9I now have 3 sheds
- Join Date
- Aug 2010
- Location
- Soldiers Point, NSW
- Age
- 60
- Posts
- 185
That would be great thanks DJ. I will send you a PM tonight.
Regards
Twosheds
Similar Threads
-
Penn 49 fishing reel
By Willem in forum TOY MAKINGReplies: 3Last Post: 18th June 2019, 10:05 PM -
Restoring antique fishing reel
By grevilleavic in forum RESTORATIONReplies: 1Last Post: 9th January 2017, 02:04 PM -
How to modify fishing reel
By Arron in forum METALWORK FORUMReplies: 23Last Post: 21st August 2015, 09:51 PM -
Fly fishing reel
By BlackbuttWA in forum WOODTURNING - GENERALReplies: 3Last Post: 8th November 2014, 09:53 AM -
best spinning rod and reel for beach fishing
By cabman in forum FISHINGReplies: 0Last Post: 13th April 2012, 08:29 PM