Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Pivot hinges
-
3rd December 2008, 03:32 PM #1New Member
- Join Date
- Dec 2008
- Location
- Cardiff NSW Australia
- Posts
- 3
Pivot hinges
Hi all, I'm Geoff and new to your forum. Doing a bathroom cabinet and wish to swing doors from top & bottom rather than non-existent sides. I believe the method I wish to use is with pivot hinges. Problem is, can't find anyone who stocks them. Any suggestions for the Newcastle area or buy online is fine also. If there are other types of hinges readily available for this purpose, I would be pleased to hear of them, Thanks heaps, Geoff.
-
3rd December 2008 03:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd December 2008, 03:37 PM #2
One type of hinge that would do it is a flush overlay hinge. Should be able to get these from any hardware shop.
"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
3rd December 2008, 03:56 PM #3New Member
- Join Date
- Dec 2008
- Location
- Cardiff NSW Australia
- Posts
- 3
Thank you Silent C. Have taken on board and have seen them around. Cheers.
-
4th December 2008, 12:42 AM #4Senior Member
- Join Date
- Nov 2008
- Location
- Perth
- Posts
- 330
pivot hinges
If you require a good quality pivot hinge then I suggest you contact Hafele Australia in your state or one of their stockists, they have a range of pivot hinges from polish brass, brass plated steel and plastic. They even have them to take a unframed glass panel.
Mac
-
4th December 2008, 06:56 AM #5New Member
- Join Date
- Dec 2008
- Location
- Cardiff NSW Australia
- Posts
- 3
Cheers Malcolm - I did notice that range and they sound really good. Was hoping for a set that is a little more budget friendly, however. Thanks for your help.
Similar Threads
-
Looking for hinges...
By CameronPotter in forum BOX MAKINGReplies: 7Last Post: 27th February 2006, 08:03 PM -
Pivot Fence for Resawing
By silentC in forum BANDSAWSReplies: 27Last Post: 17th October 2004, 09:14 AM