Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Plans for a babies cot
-
17th July 2005, 05:35 AM #1Senior Member
- Join Date
- Jul 2005
- Location
- Auckland NZ
- Age
- 76
- Posts
- 151
Plans for a babies cot
Please can anyone help with some plans for a nice babies cot. I ordered a CD from the USA which they now say will take 10 wks to come and we havnt got that long I'm afraid -- so I need something nice that is downloadable also?? Really appreaciate any help out there
Thanks
PD
-
17th July 2005 05:35 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th July 2005, 02:15 PM #2.
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 5,215
Don’t forget when you get some plans, for the safety of your own baby follow the appropriate safety guidelines regarding limb and finger entrapment measurements
The bars should be spaced between 50 and 85mm apart.
The cot should have a minimum depth of 600mm from the top of the mattress to the top of the cot.
The gap between the mattress and the cot on all sides should be under 2.5cm.
Make sure that only two legs have castors, or at least two out of the four caster legs have brakes.
Check that locking devices are easy to use for an adult but very difficult for a child.
Do some research yourself to double check as it’s a very important safety issue. Good luck with your project.
-
17th July 2005, 05:32 PM #3Member
- Join Date
- Sep 2004
- Location
- Victoria
- Posts
- 93
Gudday,
Will get back to you in couple of days with some photos etc. FIRST thing to buy is a mattress. They come in different sizes and thicknesses therefore to meet the 'standards' of gaps height from top of matress etc. you need to work from the dimensions of your matress.
I made one for ours and then built another for the sister and hers.
From the matress you can calculate length of sides, depth of sides etc.
Will be in touch.
Shannon
-
18th July 2005, 11:55 AM #4
babys cot
if you are interested in plans for a cot you can purchase a cd from canada it on this site as woodplans some 35ooo plans i puchased it over the internet and to my surprise i recieved the cd in 7days it a well worth purchase
regards
al
-
18th July 2005, 03:32 PM #5Member
- Join Date
- Sep 2003
- Posts
- 83
Hi,
I am looking for plans myself and found these:
http://plansnow.com/crib.html
Looks quite good but cannot find a local supplier for the required hardware.
If you get the plans and hardware please let me know where from.
Gary
-
19th July 2005, 01:37 PM #6
PD
I couldn't find a plan I liked so made my cot based on the cots I liked.
After getting requests for plans I made up a basic set of plans.
See attachments.
You are welcome to them if they suit what you are after.
I agree with the other comments posted -particularly about the matress size.Last edited by Scally; 19th July 2005 at 02:15 PM. Reason: couldn't attach pics to email
Scally
__________________________________________
The ark was built by an amateur
the titanic was built by professionals
-
19th July 2005, 03:03 PM #7
for the drop side mechanisms you can get two types. There are a few suppliers in Australia (Carbatec WA, www.clicksystems.com.au) of the one type (rod & latch) or you could get the hidden hardware from the US. I bought mine from www.productsamerica.com/page52.html (PH-60) and it was about US$40
If I do not clearly express what I mean, it is either for the reason that having no conversational powers, I cannot express what I mean, or that having no meaning, I do not mean what I fail to express. Which, to the best of my belief, is not the case.
Mr. Grewgious, The Mystery of Edwin Drood - Charles Dickens
-
19th July 2005, 03:46 PM #8
with a baby on the way, I spent the weekend looking at baby stuff, including cots. I concluded that I will build a change table, but leave the cots for the pros. I'd never forgive myself if something happened (even if it would have happened anyway on a purchased cot). I think there is a much lower chance of anything happening on a change table as the baby will be supervised all the time.
One thing I was told, but not sure if it is true, is that the rod and latch type of mechanisms do not meet Australian standards. As I said, I'm not sure if it is true, but the store I went to did not have any cots with that mechanism. They all used a concealed mechanism where you lift the rail and then bush the bottom of it with your leg to drop the side.
TravSome days we are the flies; some days we are the windscreen
-
20th July 2005, 01:12 PM #9Senior Member
- Join Date
- Jul 2005
- Location
- Auckland NZ
- Age
- 76
- Posts
- 151
Thanks Guys.
Ligum: For the info on the standards I will use that in conjunction with the plan.
Shannon: I am told there are a couple of sizes. (OZ/NZ and Americian)
Gazza: Thats the plan that the wife D/loaded for me.
Scally: For the effort of putting the Photo and plan up for me to see.
Lovely cot & brilliant finish. What did yo use Pls?
Trav: Thanks for your comments
Slavo: Now here's a tale. I trie deverywhere I could think of here in NZ. No go.
Next East coast of OZ No go
Finally to be found in the bottom left hand corner of OZ in a place called PERTH, you know SAND CROPER country, Timbercon & Carbatec WA. Had them posted over.
Now have Plans and Hardware, Here We go!!!!!!!!!!!
If I knew how to put in a smiley I would
PD
-
20th July 2005, 01:56 PM #10
Well done PD.
My cot is Tassie blackwood.
It is good to work , although fiddleback is inclined to tear out. Care, sharp tools and sanding are needed.
I used Livos Kunos oil for the finish.
Wipe it on and polish it off.
It is easy to use, no problems with runs or dust and gives a silky smoothe low gloss finish.
It is some natural/organic mix that is safe for kids.
It smells like oranges when you open the tin.
You should be able to find it for sale nearby.
http://www.energyandwatersolutions.c...tech.htm#kunos
Slavo: I wish I knew of these suppliers when I was making my cot.Scally
__________________________________________
The ark was built by an amateur
the titanic was built by professionals
-
8th September 2005, 12:42 AM #11Member
- Join Date
- Sep 2004
- Location
- Victoria
- Posts
- 93
My Cot
Sorry I took a while to get back to you. Number three came early on 15 August and has kept us busy since. Settlement on the new house is monday so a busy time moving coming up.
I took some photos of my cot made from brush box. Will try to up load them for all to see. Finish is Organoil hard burnishing oil (a cold pressed not petroleum extracted tung oil good for kitchen cutting boards etc.)
Lets see if these images load.
Cheers
Shannon
-
13th September 2005, 11:03 AM #12
Congratulations on number 3 and a new house.
You have been busy.
It would be good to see picsof your cot if you get a chance.Scally
__________________________________________
The ark was built by an amateur
the titanic was built by professionals
Similar Threads
-
Baby cot plans, but different.
By Robert WA in forum DESIGNS & PLANS FOR PROJECTSReplies: 14Last Post: 23rd November 2006, 09:59 AM -
Wanted Modern Cot Plans And Designs
By kristyandshane in forum DESIGNS & PLANS FOR PROJECTSReplies: 2Last Post: 9th August 2004, 01:20 AM -
Safe Finish for babies Cot
By Geoff Dean in forum FINISHINGReplies: 5Last Post: 20th May 2004, 10:16 PM -
Cot Plans
By BigPop in forum WOODWORK - GENERALReplies: 16Last Post: 6th November 2003, 11:53 PM