Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 17
-
29th December 2005, 11:58 AM #1
Powerpoint Layout for 10 by 7 Shed
Gidday
As some of you know I'm presently in the process of hooking up power to my Shed. The dimensions are 10 by 7 meters. The sparky is asking me where I wanna put the powerpoints. Hell be setting up as follows.
3 * Fluro Lights
2 * 15amp outlets
2* double standard outlets
I'd like the setup to be versatile and be able to deliver the goods on an eventual fully kitted out Home Shop including provision for
Tablesaw
Jointer 8"
Thicknesser 15"
BAndsaw
ANy advise layout suggestions floor plans etc would be really appreciated. Ideally where should I place my power outlets????
Heres a pic of my shed and hows shes progressing so far!!!
http://www.woodworkforums.ubeaut.com...t=finally+shed
REgards Lou:confused: :confused: :confused:Just Do The Best You Can With What You HAve At The Time
-
29th December 2005 11:58 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
29th December 2005, 12:22 PM #2Originally Posted by NewLou
Surely you are missing a ZERO after the 2.
It'll cost, yes;
but cheaper and easier now
rather than later.
You might opt for Two Twins at least, rather than One Twin.Navvi
-
29th December 2005, 12:37 PM #3
G'day NewLou,
On the fluro side of things: I'd put in a row of a pair of three fluros down the length of the shed with one at either side, similar to what Ivan in Oz posted.
I have a 9x7m shed with the above and works a treat. I also have 2 spans of clear Laserlight sheeting spaced at 1/3 intervals.
One thing about p/points you can never have too many. I've got 8 x 10amps and they're already filled permantly. And 1 x15amp, wouldn't mind another. Also think about a double powerpoint located just above your bench/s.
-
29th December 2005, 02:05 PM #4
My 6x12 has uprights at 3m intervaLS AND i PUT 2 doubles between each one with another 4 across the back wall, probably more than I need but better than too few.
I am on a 30 amp circuit and the runs come from two points at the leakage detector circuit in the shed.
Lighting is the next issue.
Viva daylight savingStupidity kills. Absolute stupidity kills absolutely.
-
29th December 2005, 02:09 PM #5
NewLou,
I suggest you get him to hang at leat four double powerpoints on chains from the shed roof at a height of about 2 metres from the floor. I have this setup in my shed and it saves having too many cables trailing over the floor to your machines. I have one of these above my workbench with a 1.5 m extension lead hanging from it. I have shortened all the power cables on my power tools to a length of 300 mm, and plug whichever power tool I want to use into the extension lead.
Rocker
-
29th December 2005, 02:13 PM #6
I'll echo Rocker's suggestion on hanging power points, they are very versatile.
-
29th December 2005, 04:22 PM #7
In my 11 x 7 shed I have 6 double flouros && 2 rows x 3} Powerpoints 12 double and a 15amp as well for the welder and 3hp thicknesser.
Plenty of light and power You dont want leads all over the floor.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
29th December 2005, 06:18 PM #8
G'day Lou,
Personally, I think that you're being way too conservative with the number of outlets - and lights.
I'd want to have twin 10A outlets about every 2 or 3 metres, and at least 4 15A outlets.
As for lighting, you'll need decent flouros or halogens for each workstation / machine. Lots of light on the bench, and ditto anywhere where you might need to measure, get a sight line, etc.
Then there's the A/C, plus fridge
I realise that this is more costly now, but much cheaper than trying to add later, and in my shed I am sick & tired of blerry extension cables.
Cheers!
-
29th December 2005, 09:26 PM #9
In my shed I have 15 double 10 amps and 2 singles on outside walls and 2 15 amp points one inside a one on an outside wall for the dust collector or the Mig welder.
I have 2 double flouros and 2 single flouros and two 1800 x 1200 windows and three roller doors.
The shed is 7.2m x 6m
-
29th December 2005, 10:34 PM #10
-
30th December 2005, 07:47 AM #11
Great Advise
Gidday
Some excellent feedback here fellas! I really appreciate the advise. However shes just a Renter and I can justify butting more plugs in!!!!
Will certainly use this thread as a guide for when I buy a new house level it and put down my own shed
Considering that the heart of the shop will eventually be a table saw at a diagnol in the centre of the shop and jointer thicknesser nearby to facilite a smooth worflow when milling....................where would you strategically place the limited number of 15amp and double standards I have to play with????
REmember I've been used to using a 30meter power cable too hook up everything from a plug in the house so I figure its going to be like heaven for me anyway!
REgards Lou:eek:Just Do The Best You Can With What You HAve At The Time
-
30th December 2005, 09:06 AM #12
I think Rockers suggestion is on the mark.
As it is a renter how about:
a heavy duty run (or 2) from the main house box to the shed, each run put down along the length of the shed in the roof. If it is a high pitch, suspend it on a guy rope stretched the length of the shed, or whatever is legal.
Have -
One run for hanging power outlets. (have different length leads so you can get them to near the sides of the shed)
One run for hanging outlets for double fluros that have power cords ends on the leads, position these wherever you want them.
Pull the whole lot out when you leave the rental and put it in the next place.
Just get the sparkie to tell you how much can hang off each run so you don't exceed the capacity. I don't imagine you will be starting a vacuum, a/c, thicknesser, tablesaw, welder and lathe all at once anyway.
If you don't want to take the main cable run (from the house) when you leave, put industrial weaterproof outlets on the shed end and install it as a permanent fixture (and ask the landlord for a discount off the rent).
I hope I haven't confused you with my dodgy description.
Anyway, this gets you enough power points and lights, it is not designed around a shed that you will leave, and you can take it with you when you go.
-
30th December 2005, 04:05 PM #13
In our rental house's garage, there is only one GPO and I have a mass of leads and powerboards set up. However, I can run a 900mm flouro, a compact bulb flouro, a Jet 10" Supersaw, a 1HP DC and the SCMS all at the same time off a single power point. Not ideal by any means, but it does go to show that:
a. Induction motors draw a fairly small current once up and running
b. Your max current draw at any one time might not be as high as you think"If something is really worth doing, it is worth doing badly." - GK Chesterton
-
30th December 2005, 07:06 PM #14
New Lou
All of my flouros have a 1 meter long flex cord and plug connected.
The light switch turns the power on and off to outlets spaced along the ceiling rafters.
This set up is really flexible. When a light goes faulty, just buy a new one a get a sparky to put the lead on. It is only a couple of minutes work and you can take the fittings to them. The lights can also be moved without an electrician, as long as the lead is long enough. The same idea is used for fans.
In your case when you move the light fitting can come with you.Specializing in O positive timber stains
-
30th December 2005, 07:11 PM #15GOLD MEMBER
- Join Date
- May 2005
- Location
- Brisbane North
- Age
- 51
- Posts
- 1,299
Available from Bunnings< Arlec 6 Outlet Power Chain. 12m lead with an outlet every 2m. This for only, $29.98.
Similar Threads
-
My shed accredited shed
By Waldo in forum WOODWORK - GENERALReplies: 52Last Post: 24th November 2006, 03:32 PM -
My Non-existent Shed Story
By RufflyRustic in forum WOODWORK - GENERALReplies: 14Last Post: 14th June 2005, 11:28 PM -
Shed, Garage or Workshop?
By bitingmidge in forum WOODWORK - GENERALReplies: 36Last Post: 2nd July 2004, 01:09 AM -
Shed Layout Software
By Wayne Davy in forum HINTS & TIPSReplies: 0Last Post: 15th May 2003, 12:13 PM