Record 136 Sash clamps

**David N** · 15th May 2014, 08:52 AM

I've just purchased a number of Record 136 sash clamps and some are missing the stoppers at the ends. I need 4 stoppers to make them complete. Can anyone help me out as I am willing to purchase them.

**rod1949** · 15th May 2014, 10:32 AM

Are these the units that can have extensions placed on them if so then they won't have stoppers.

And if your really want a stopper the just use a stub bolt and nut.

**David N** · 16th May 2014, 08:23 AM

Originally Posted by rod1949

Are these the units that can have extensions placed on them if so then they won't have stoppers.

And if your really want a stopper the just use a stub bolt and nut.

No its not the stud bolt and nut that I want, but the clamping end of the clamp. The clamps I have are the T bars.

**Enfield Guy** · 16th May 2014, 09:17 AM

Are the "stoppers" you refer to the pin and chain? If so, it would be a fairly simple matter to make a couple.

Cheers

**David N** · 17th May 2014, 09:39 AM

Originally Posted by Enfield Guy

Are the "stoppers" you refer to the pin and chain? If so, it would be a fairly simple matter to make a couple.

Cheers

Not the pin and chain but the whole end piece

**ian** · 19th May 2014, 07:44 PM

Originally Posted by David N

Not the pin and chain but the whole end piece

I've never seen the Record adjustable tail as a spare part.

You options are most likely

use the screw head from one to turn two clamps into one

buy a cheaper version and swap the tails over

Thread: Record 136 Sash clamps

Thread Tools

Search Thread