Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 44 of 44
Thread: My school project
-
6th February 2008, 10:27 PM #31Member
- Join Date
- Dec 2007
- Location
- Ballarat
- Posts
- 52
Sounds good
I decided to scrap the whole idea of the dodgy CD/DVD box thingys. Keep the top the same length except for the width have it 620 have it come of the front 20mm.
Make the legs come out more so cover up some of the space that held the CD/DVD thingys. and add 2 shelves. 2nd shelf is RIGHT to the ground. Maybe still deciding
I still don't how i should do the middle shelf seeings as though your going to have to have something to support it. So any ideas on how i should do them properly? Should i just get the MDF mark the legs of it cut those bits out and put some wood inbetween the legs to support it and just stick the MDF in? Probably makes no sense but I'm stuck.
Thats how i did it on my workbench the long bits of timber support the MDF and i just sat the MDF on top and screwed it in. So it sat in perfectly between the legs
-
6th February 2008 10:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th February 2008, 08:03 AM #32Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
More mind changing!!
G'day Dark one!
Corbs idea of the torsion box would, IMHO, be better applied to your top shelf, or both for that matter.
I use second hand internal doors for shelving. Cot 'em down the middle - or to whatever width- and run a piece of mber inside the exposed edge, glue and cramp. Bingo!! Inepensive an very strong shelf.
Maybe you could lookat a door with a nice plywood skin for shelving?
Apart from aestheti appeal you legs need not be thick to take account of weight. They will be vertical and braced so shoul hold any weight you will subject them to for the intended usage.
-
11th February 2008, 09:00 PM #33
Hi Mate,
Can i ask what school you go to, I teach in sydney and i am interested in how you get to design your own stuff for yr9?
Anyway, I think you will find, you are not allowed to use either MDF or Treated pine at any school in NSW let alone Australia, it has been banned by workcover and Dept of Education.
I would suggest either Oregon, or laminated clear pine for the legs, maybe some VPD for the shelving.
Best of luck.
-
15th February 2008, 09:54 PM #34Member
- Join Date
- Dec 2007
- Location
- Ballarat
- Posts
- 52
Hey i goto a school in Beaufort. I chose woodwork as an elective and the woodwork teacher said you get to design anything you want just as long as you don't distract anyone and actually work.
And at our school we can use MDF. We always have been allowed to use it
-
15th February 2008, 10:34 PM #35Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
8:54pm
Shouldn't you be in bed?
-
15th February 2008, 10:40 PM #36Member
- Join Date
- Dec 2007
- Location
- Ballarat
- Posts
- 52
Haha no its a Friday night no school tomorrow lol
-
15th February 2008, 10:54 PM #37
Artme.
For an old buggar who has had a recent op, you are giving a lot of useful advice for the youngsters.
Good to see you are obviously on the improve and if your health is up to it would appreciate it if you can make your way down to Neil's B B Que at Nerang on the Gold Coast.
-
15th February 2008, 11:19 PM #38
Just another way of thinking....
Hi, DW...
Well just been following your thread...would like to suggest a few things to you....seems your keen on woodwork. I acknowledge your enthusiaism... your aptitude & dedication are exceedingly good qualities, your well on your way to becoming "woodie"
OK...now my names Kerry... lady woodworker & I have a complete different approach.... like to believe I am a lateral thinker....not that I don't admire all types of woodworkers...but my approach is a little different.....wanted to show you another concept...unique & practical.
I've named it "ENCASEMENT"...it combines several catorgories...recycling...re-enforcing... while proving to be stonger, cheaper & quicker...
I've shown you the link to see...one of my units...
tell me what you think...
I use lots of mdf...inside the finished unit....but there are several basic rules....when you ready to have a go...let me know I can discuss this more....I also use a lot of "construction pine"...yes a cheaper option...& its not treaded with any chemical...but like everything tools are the basis & with-out good tools many a job goes astray....
cheers hope you like the link....
Ok...the second suggestion...join a technical drawing group....you will never be sorry...I did only one year....now 36 years ago....still remember & use the knowledge...Oh and buy yourself a tape measure....it helps you when your talking about dimension...its easier to understand...
Kindest regards....Kerry (shed's not solely a man's domain....I also love to teach & encourage).... basic rule I've used since I've been doing woodwork....shared imformation ....increases your knowledge ....your ability...& your friendships.....
http://groups.msn.com/WOODWORKCountr...ncasement.msnwDon't think you're playing it safe by walking in the middle of the road.....that's the surest way to get hit by traffic coming from both ways!
I'm passionate about woodwork.......making Sawdust again & loving it!
-
15th February 2008, 11:29 PM #39Member
- Join Date
- Dec 2007
- Location
- Ballarat
- Posts
- 52
Hey i just decided to use Pine lol nice and cheap. If it turns out alright ill use a better sort of wood. I got 8 posts of 90x90 700mm length only cost $69. They are way to thick. How much do you reckon i should plane them?
Kekemo I'm definitely keen on woodwork. Planning a career as a carpenter hope i get it
And those units that you have built look really good
Oh and by the way i do have Tape Measures lol
-
16th February 2008, 09:55 PM #40Senior Member
- Join Date
- Oct 2007
- Location
- Central Coast
- Age
- 33
- Posts
- 372
why plane?? what size are you wanting them? does your school have a thinkneser? if so? dress them down to required size, or even cut down the middle geting the teacher to using a table saw?
-
17th February 2008, 03:29 PM #41Member
- Join Date
- Dec 2007
- Location
- Ballarat
- Posts
- 52
Yeah sorry thats what i meant by plane lol. Using the thicknesser. And yeah they do.
-
17th February 2008, 05:36 PM #42Senior Member
- Join Date
- Oct 2007
- Location
- Central Coast
- Age
- 33
- Posts
- 372
thats good. i was thinking man he will have to plane a fair bit.lol. so have you stated construciotn yet? or still designing. unlike me you are actually planning out the design well and thinking of different ideas BEFORE you have started. i on the other hand come up with a design and start, then work out the problems as they arise. good work, keep it going.
Rhys
-
18th February 2008, 10:08 PM #43Member
- Join Date
- Dec 2007
- Location
- Ballarat
- Posts
- 52
I started but i started working on 2 posts first. But since I'm going to use the thicknesser on them all i wont bother continuing until it is done
-
20th February 2008, 08:39 PM #44Member
- Join Date
- Dec 2007
- Location
- Ballarat
- Posts
- 52
I got the wood a bit thinner so its the right size. I got a double period of woodwork tomorrow 3rd and 4th so i can continue working on it
Similar Threads
-
Getting to school
By wheelinround in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 8Last Post: 12th September 2007, 08:45 PM -
Who else has been to Rad School
By Iain in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 8Last Post: 15th August 2005, 12:09 AM -
School Photos
By Wood Borer in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 8Last Post: 27th June 2005, 07:23 PM -
Pre-school in Chatswood
By Wongo in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 5Last Post: 11th October 2004, 09:54 AM -
School Project
By Rod Smith in forum WOODIES JOKESReplies: 1Last Post: 31st July 2001, 10:16 PM