Thanks: 0
Needs Pictures: 0
Results 1 to 5 of 5
-
26th July 2021, 10:37 PM #1
What I have been making in the shed
Has anyone tried making this small folding table. I have been making them for about 12 months and selling them as I travel around in the van but that has all come to a stop now.
I would make them out of re milled pallet timber so the timber is free!
Before anyone comments I only use food grade or pallets that are not sprayed.
There is a sight giving codes of all classification of all pallets and some large retailers own the pallets like Bunnings for instance they are painted green or red I think.
To get on with my little project this is where I got the Idea from Carl Jacobson SMALL FOLDING TABLE
How To Make A Folding Table - YouTube Hope this works as I am not up to things now
Last of all is there anybody out there that has tried this build and if so could they send me a post please
Regards colbra
PS I will take picture of one getting made and a finished one tomorrow I think ?
https://www.woodworkforums.com/images/attach/jpg.gif
https://www.woodworkforums.com/images/attach/jpg.gif
https://www.woodworkforums.com/images/attach/jpg.gif
HAVE TAKEN ONE OTHER PICTURES OF THE TABLE FOLDERED UP. BUT IT WILL NOT LOADUP NO WONDER I DRINK SO MUCHLast edited by colbra; 27th July 2021 at 11:50 AM. Reason: ADD PICTURES
May your saw stay sharp and your nails never bend
-
26th July 2021 10:37 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
27th July 2021, 07:47 PM #2
Folded up table
I THINK I HAVE DONE IT
IMG_0059.jpg
colbraMay your saw stay sharp and your nails never bend
-
27th July 2021, 10:39 PM #3
Thanks for reply Jeff
Are you up for a beer l can send it through cyber space.
Regards ColMay your saw stay sharp and your nails never bend
-
27th July 2021, 11:30 PM #4
I made a version of that from plans in a magazine back in pre internet days. It is larger and has proportionally thinner slats but it's essentially the same. I like it because it is so quick to set up and I use it for various things around home on a temporary basis.
Cheers, Bob the labrat
Measure once and.... the phone rings!
-
29th July 2021, 07:39 PM #5
Hi Bob it takes me a long time now to make one table at the start of the project I could do it in about two days.
Now about week I have the plan if any one wants a copy even its just to see how long they take sort of like a forum Olympics
Regards colbraMay your saw stay sharp and your nails never bend
Similar Threads
-
Wheel Making Part Two Making the Wheels
By htl in forum TOY MAKINGReplies: 4Last Post: 22nd February 2019, 04:35 PM -
Here's a How2 for making a jig for making quick rims for your wheels.
By htl in forum TOY MAKINGReplies: 4Last Post: 8th February 2019, 10:29 AM -
shed tank stand footings questions - tie to shed slab?
By desbromilow in forum THE SHEDReplies: 5Last Post: 5th January 2015, 09:09 AM -
My daughter's Xmas present-aka-Making a shed into a workshop.
By Sturdee in forum THE SHEDReplies: 157Last Post: 1st March 2011, 09:16 PM -
making speakers for shed
By yozza in forum HI FI EQUIPMENTReplies: 4Last Post: 9th December 2008, 10:27 AM