Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
-
30th September 2007, 08:22 PM #1
Shed Improvements and Timber storage
A recent purchase of a bandsaw (CTJ 3501 ) neccessitated a major overhaul of the shed layout.
Part of the process involved finding a place for some timber up to 1.5metres long. So we made a lidded box on wheels.
Design flaw 1: I should have done the rebates on the front (and back) panels the other way around. As soon as the box was full, it became obvious that a couple of screws holding the front on was not enough. (It has been reinforced with a couple of steel brackets on the inside)
Design flaw 2: The wheels needed to be the next size up - I think they're overloaded!
A neat place for storage.
-
30th September 2007 08:22 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th September 2007, 08:33 PM #2Awaiting Email Confirmation
- Join Date
- Jan 2007
- Location
- Goulburn NSW
- Age
- 89
- Posts
- 913
A good idea for your timber storage
les
-
30th September 2007, 09:09 PM #3
Hi Eowyn, These under-bench drawers are great! I've made two now, one for timber bits 1.2 m or less in length, and the second drawer for all my finishes.
I like how neat yours is.
Cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
2nd October 2007, 11:20 AM #4
Very smart idea.
I have lots of small pieces of wood that seem to good to throw away. They are too small for the timber rack and get lost in bin.Scally
__________________________________________
The ark was built by an amateur
the titanic was built by professionals
-
4th October 2007, 12:31 PM #5Senior Member
- Join Date
- Aug 2002
- Location
- Williamstown, Melbourne
- Posts
- 486
Well done.
An offcut drawer like that is an absolute necessity!
I don't know how I survived so long without one.
-
4th October 2007, 02:06 PM #6Cro-Magnon
- Join Date
- Sep 2007
- Location
- Central Victoria, Australia
- Age
- 64
- Posts
- 764
One comment ... next time you make a box like that, put the joint on the other orientation. The joint should resist the pulling force ... that appears to be dowelled, in which case the dowels should show on the narrow ends, not the front/back of the box.
-
4th October 2007, 02:41 PM #7Senior Member
- Join Date
- Aug 2002
- Location
- Williamstown, Melbourne
- Posts
- 486
-
4th October 2007, 05:25 PM #8Cro-Magnon
- Join Date
- Sep 2007
- Location
- Central Victoria, Australia
- Age
- 64
- Posts
- 764
I think you are right ... sorry for overlooking the obvious
-
4th October 2007, 05:48 PM #9
'she'
Ooops. I've just bought a jointer. Shed reorganisation V2.5 coming up!
-
5th October 2007, 10:52 AM #10Senior Member
- Join Date
- Aug 2002
- Location
- Williamstown, Melbourne
- Posts
- 486