Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 30
-
11th May 2007, 08:03 PM #1
Skinnying down paddle pop sticks...
I need to cut down paddle pop sticks (10mm wide) to about 4mm wide. I need about 100... I'll be spending tomorrow night with a sharp knife whittling away, but I'd be grateful for any ideas on speeding up the process. I thought of putting the vice and trying to plane them, but I'm too scared of bashing the plane blade on the vice. Although I could use a couple of bits of soft wood to hold the paddlepop stick. Or maybe I should cut a 4mm groove in a bit of soft wood, then clamp it into the vice.
All ideas gratefully received.
For those who are wondering, I"m studying civil engineering, and we have to build a bridge, the engineering way, and the calculations mean we have to have 4mm beams.Cheers, Richard
"... work to a standard rather than a deadline ..." Ticky, forum member.
-
11th May 2007 08:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th May 2007, 08:23 PM #2Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
This is the tool you need, well I think it is anyway as there is no piccie.
Its a small adjustable knife like plane for stripping off balsa for models.
http://www.hobbyco.com.au/product/sh...plu=MASTRIPPER
Al
-
11th May 2007, 08:45 PM #3
Did a google image search on balsa stripper here - some pics & ideas.
Good call Al
Cheers..................Sean
The beatings will continue until morale improves.
-
11th May 2007, 08:56 PM #4Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
Good one Sean, how come I didnt think of that..?
But yep, thats the tool to do it..
Al
-
11th May 2007, 09:49 PM #5
I'd have no hesitation in running them through my table saw.
I'd set up a fixed fence on the sled, hold them down with a Grrripper, and just rip away. It'd take no time flat!
Cheers,
P
-
11th May 2007, 09:59 PM #6
-
11th May 2007, 09:59 PM #7
band saw, no problems
even better a printers gilotene.
a 2" chisel.... bang, bang, bang
a slot jig with an electric planer
a different slot jig & a router
this sounds like a good asignment or competition
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
11th May 2007, 10:08 PM #8
-
11th May 2007, 10:09 PM #9
-
11th May 2007, 10:13 PM #10
-
11th May 2007, 10:20 PM #11
I'll post a pic!
I tried the chisel,but the grain's not straight enough. Hadn't thought of a guillotine, maybe an old fashioned one with a head chopping arm?
I don't have a band saw or router or a table saw either, only a circular saw and jig saw and an electric plane. Is a slot jig a slot cut into a piece of wood to take the paddle pop stick? I could probably do that with the circular saw, but it'd need to be in a thin piece of wood so that it grips when I put it in the vice? Or 2 pieces of 9mm ply, with a couple of sticks in between to hold them out ot the right width - no need to cut then, put them in the vice, push in a paddle pop stick, tighten, run the electric plane over the top, pop it out, pop another one in... Sounds like a plan.
Much faster than whittling... This might be an occasion to let the power tools win the argument!
BitingMidge, "running them through my table saw" ??? Really? you've only got a 6mm width to hold on to, less the blade width... And a band saw? Same thing? I don't have access to either and need to start construction on Sunday, so I neither are going to be feasible this time, but really? 10mm down to 4mm on a high speed power tool?Cheers, Richard
"... work to a standard rather than a deadline ..." Ticky, forum member.
-
11th May 2007, 10:21 PM #12
Oh, and thanks for the balsa strippers too. It always amazes me that whatever problem you come up with someone somewhere is selling a tool to do it!
Cheers, Richard
"... work to a standard rather than a deadline ..." Ticky, forum member.
-
11th May 2007, 10:23 PM #13
-
11th May 2007, 10:31 PM #14
Why not go to the hobby shop and buy some 4mm balsa strips.
-
11th May 2007, 10:34 PM #15Cheers, Richard
"... work to a standard rather than a deadline ..." Ticky, forum member.
Similar Threads
-
Throwing sticks for pottery
By dan_tom in forum POTTERYReplies: 8Last Post: 19th July 2006, 01:09 PM -
Winding Sticks - news from LV, plus my tip for the day
By derekcohen in forum HAND TOOLS - POWEREDReplies: 2Last Post: 10th December 2005, 11:25 PM