Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Sliding Doors
-
13th May 2013, 07:01 PM #1Senior Member
- Join Date
- Oct 2011
- Location
- Brisbane
- Posts
- 104
Sliding Doors
Hi Folks,
I was thinking of building a sliding door cabinet. What kind of ratio between width and height of each door should I be looking at to make sure the doors slide and aren't too tippy? Also, how deep should the bottom groove be? Is an 1/8th too little?
Cheers
-
13th May 2013 07:01 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th May 2013, 11:17 PM #2
Pretty difficult one to offer advise on without in depth specs. Door size and weight will be major factors. I gather they will not be running on rollers/glides.
-
14th May 2013, 01:56 AM #3
to offer reasonable advice you need to tell us the approximate dimensions of the cabinet
an idea of the internal design -- diaphram walls etc
width of the doors
design of the doors
what weight will be on the top of the cabinet and the span between supports
what sort of weight will be on the bottom shelf and how taht shelf is supported -- it's about deflection
what sort of joints -- sides to top and bottom -- you are going to use
1/8" seems a little shallow, for a largish cabinet I'd be thinking 5mm -- 3mm might work with a small cabinet
how will the doors track within the railsregards from Alberta, Canada
ian
-
14th May 2013, 08:24 AM #4Senior Member
- Join Date
- Oct 2011
- Location
- Brisbane
- Posts
- 104
Well there's a few things I didn't think of... The cabinet will be around 900mm wide and around 800-900mm tall, not including legs (open to change based on dimensions of the doors and what I think looks right). Will have one central shelf. Made from 19mm thick material. Most likely it will be doweled together. I don't think it will be holding diff centre's, so let's assume minimal deflection from carried weight. The doors would be a bit more than half the width. Probably a ply panel. Runners won't be used, I just envisaged grooves.
Similar Threads
-
Help making sliding cabinet doors
By la Huerta in forum WOODWORK - GENERALReplies: 3Last Post: 29th December 2010, 01:03 PM -
DIY wardrobe shelves, where buy sliding doors?
By aleksa in forum WOODWORK - GENERALReplies: 4Last Post: 19th October 2010, 12:56 PM -
Cabinet sliding doors
By simopimo in forum WOODWORK - GENERALReplies: 2Last Post: 28th August 2009, 02:15 PM -
Sliding Doors
By WoodNoob in forum WOODWORK - GENERALReplies: 0Last Post: 31st August 2007, 09:12 PM -
Roller/Sliding Doors
By Just George in forum TRITON / GMCReplies: 1Last Post: 1st July 2005, 06:22 PM