Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 9 of 9
  1. #1

    Default Softward for workshop planning

    Hi,

    I am soon to move house and will (hopefully) have the funds and space to set up a half-decent workshop finally. Being the pedantic type, I'd like to plan it out to see what I can fit, rather than try to move machinery around once I get it.

    So, is there any recommended software out there specific to, or suited to, workshop design? ie, recommendations of CAD or house planning s/ware where oyu can draw/build shapes such as bench, saws, etc and drag them aorund to try layout combinations? Or can you get templates for AutoCAD or similar of workshop equipment?

    Thanks in advance, interested to know what's out there.

    Regards,

    Darren

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2003
    Location
    Gorokan Central Coast NSW
    Age
    79
    Posts
    2,765

    Default

    Darwin, no matter how much you plan and shuffle, the workshop you end up with, no matter how big it is, will only be half the size you need.
    Regards
    Cramped Termite

  4. #3
    Join Date
    Jan 2003
    Location
    Melbourne, Australia
    Age
    54
    Posts
    706

    Default

    I know it is low-tech but cutting paper/card cutouts of your bench and machine footprints would probably be quicker to shuffle around on a basic piece of grid paper.
    Great minds discuss ideas,
    average minds discuss events,
    small minds discuss people

  5. #4
    Join Date
    Sep 2003
    Location
    Elimbah, QLD
    Posts
    3,336

    Default

    I agree with DaveinOz that shuffling bits of card on graph paper is the way to go for planning your workshop layout, especially as there is a pretty steep learning curve with CAD software. Nevertheless, I have found Cad software (AutoSketch) very useful in helping to plan woodworking projects. It probably will take about 50 hours of hard study to become familiar with and attain competence to use all the features of this software, but I have found the effort well worthwhile, especially if you hope to design your own furniture, or publish articles in magazines. The software costs about the same as a good-quality block-plane (about $220).

  6. #5

    Default

    Hi,

    Thanks for the initial replies. I did the cut-outs/graph paper thing with my current layout, just wondered if there was something more high-tech. I have used Rhino 3D and AutoCAD a little in the past, and a colleague thinks AutoCAD may have templates for machinery, but I thought there may have been something middle of the road out there (there eems to be a program for just about everything else).

    Agree the CAD stuff is good for project plans, I (and many others) use it for model ship building to plan frames or features from plans.

    Regards,

    Darren

  7. #6
    Join Date
    Sep 2003
    Location
    Elimbah, QLD
    Posts
    3,336

    Default

    I don't really see why you need to get software with templates for machines to plan your workshop. Just simple rectangles would surely do the trick. If you insist on being fancy, you can create your own symbols, or templates. Any 2-D software, such as TurboCad, AutoSketch or AutoCad Lite would be suitable, if you are already familiar with CAD. 3-D programs such as AutoCad cost several thousand dollars.

  8. #7
    Join Date
    Nov 1999
    Location
    East of Melbourne.Vic. Australia
    Posts
    904

    Default

    Put everthing where you think it should go. But don't bolt it down! You will soon discover the ideal spot where you , and your machines, work best...
    Jack the Lad.

  9. #8
    Join Date
    Jan 2003
    Location
    Gympie QLD
    Age
    61
    Posts
    1,095

    Default

    Darren,

    I agree with the guys that your tools will be moved around a lot no matter what you plan. However, I also like to try and plan a bit to, hopefully, save the back a bit when changing the toy room layout. So, I have found and tried a few shop layout software which I had posted up on the forum months ago at:
    http://www.woodworkforums.ubeaut.com...?threadid=4229

    This is the post below:
    ----------------------------------------------------
    Shed Layout Software
    There is a Computer Program (free I believe) called "Easy Shop Designer" that I found that allows you to do a shed/workshop layout. Go to http://www.inthewoodshop.org/software/software.shtml

    Another one is at ToolDock (US Company with nice modular tool benches = expensive though) "Design Your Shop" using a web based flash app. Go to http://www.tooldock.com/designyourshop.asp
    ----------------------------------------------------

    Also, another page of Wood Working related software can be found here if anyone is interested:
    http://www.woodbin.com/downloads/
    Wayne
    ______________________________________________
    "I'd be delighted to offer any advice I have on understanding women.
    When I have some, I'll let you know."
    Picard

    * New Website - Updates Coming Soon *
    http://wayneswoodwork.davyfamily.com/

  10. #9

    Default

    Hi,

    Thanks Wayne for the links - I didn't see the original message thread. These look like what I'm after, I figured someone somewhere would have written something.

    I'm sure things will move around but at least this will give me a starting point, and it's easier to do on a laptop than moving bits of paper around on a plane or train (which is where I usually get to do my planning!).

    Regards,

    Darren

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •