Stroke sander sanding belt sources

**Humphrey9999** · 11th February 2013, 10:22 PM

Originally Posted by Stewey

Back to my original question though...

it's been about five days since I emailed four separate abrasives suppliers in Oz, including The Sandpaper man, with a simple query about price on a 6120 x 150mm belt of varying grits. (also interested in a 3500 x 150 belt/s for the Luna sander)

Zero replies so far.

Maybe I need to be more patient?

Perhaps you could PM the Sandpaper Man.

You bought the Luna?

**Stewey** · 11th February 2013, 11:34 PM

Yes, the Lunar Module landed here. (Thanks for the heads-up).
Nice little light unit-rather under-powered at 1.1 kw, and it took a fair bit of 'tuning' that I didn't think it would have needed, before it was OK to use properly, but it's also a 1200 wide flat bed sander on top-after you prop a chock under the sticky-out end to stop it bouncing about.
Had to make a graphite slip-cloth pad for it too...
Also needed to fit a 3-phase switch to the unit too-too far to walk to the plug to turn it off!

**Humphrey9999** · 12th February 2013, 12:07 AM

Originally Posted by Stewey

Yes, the Lunar Module landed here. (Thanks for the heads-up).
Nice little light unit-rather under-powered at 1.1 kw, and it took a fair bit of 'tuning' that I didn't think it would have needed, before it was OK to use properly, but it's also a 1200 wide flat bed sander on top-after you prop a chock under the sticky-out end to stop it bouncing about.
Had to make a graphite slip-cloth pad for it too...
Also needed to fit a 3-phase switch to the unit too-too far to walk to the plug to turn it off!

Good one. It sounded like a pretty fair buy for the price.
(Hope you get a reply for your belts.)

Thread: Stroke sander sanding belt sources

Thread Tools

Search Thread

Similar Threads

Sanding varnished weatherboards - belt or 1/3 sheet sander?

Tags for this Thread

Posting Permissions