Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
23rd January 2007, 03:28 PM #1
tablestand free to a good home in sydney area
My landlady as asked me to put out on the nature atrip a wrought iron table.
The base is around 30inches square and has 10 bolt holes at the top of each top holding frame. The wooden top slats have rotted away.
This would make a good worktable for anyone interested (not suitable for a router stand though).
ring me on 0423611500 if interested.woody U.K.
"Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln
-
23rd January 2007 03:28 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd January 2007, 03:34 PM #2
Hi John, can you post a picture?
-
24th January 2007, 10:16 AM #3
Unfortunately Bleeding Tom I cannot post pictures from the PC I use owing to library restrictions in force at Lane Cove.
However the iron framework is substantial with only surface rust and the legs are crossed braced with a meeting point of all braces towards top centre of the frame. (hence not suitable for locating a router)
A new top can be fitted easily because there are 10 holes each side (20 in all) which run across the top of each end. The present top (wood rotten) areas is 30"x 30" but could easily take a longer and slightly wider dimensions if required.woody U.K.
"Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln
-
24th January 2007, 02:10 PM #4
Mate are you sure about those measurements 30'' x 30" is a small table
-
24th January 2007, 05:22 PM #5
Its not real relevant, but bleedin thumb, if you reverse that verse of stairway to heaven in your signature, you get satanic lyrics
-
25th January 2007, 10:33 AM #6
-
25th January 2007, 11:05 AM #7
-
25th January 2007, 07:19 PM #8SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Victoria
- Posts
- 664
It is a long hike from MElbourne to devon to pick it up though!
Tools
Similar Threads
-
Good places for timber in Sydney
By mkcl in forum TIMBERReplies: 12Last Post: 14th December 2012, 11:33 PM -
Life is good.
By RETIRED in forum WOODIES JOKESReplies: 0Last Post: 2nd August 2002, 10:13 PM -
Beers Good Tucker,.. Eh!
By John Saxton in forum WOODIES JOKESReplies: 4Last Post: 30th November 2000, 05:24 PM