Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
-
2nd July 2005, 10:01 PM #1
Thicknesser - Ryobi Anti Kickback?
About to invest in a thicknesser and noticed that Bunny's now stock a Ryobi equivalent to the GMC
The Ryobi AP 13AK is a generic duplicate of the GMC with added features of an anti kickback feature and a dust extraction shute for an extra $40
ref http://www.ryobi.com.au/piccolo_public.htm
Appreciate any thoughts as to whether the anti kickback feature is a positive, a negative or just a gimmick
Regards
Barry
-
2nd July 2005 10:01 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd July 2005, 10:15 PM #2
Kickback usually only occurs on a thicknesser if a piece of wood breaks off the main board coz of a crappy knot etc. Seems a waste of money to me.
BUT I NEVER stand directly behind timber going into any machine.
-
2nd July 2005, 10:19 PM #3
Barry, I have a Sherwood MB 1931 (same as GMC, Ryobi etc diferent paint work though, very bright orange )
I'm unsure of the anti kickback feature. Mine has never suffered 'kickback' so I don't know what they are trying to say?Bruce
I never try and get my ambitions and capabilities mixed up, but a few cold beers, on a hot day, and well, you all know what happens next!
-
2nd July 2005, 10:24 PM #4
Being a paramedic I hear about or see a lot of accidents, and I know of an incident last year where a guy was thicknessing a peice of 10mm x10mm x 200mm timber and it kicked back, went right through his thigh and hit the wall behind him. not nice!!!! :eek:
If it goes against the grain, it's being rubbed the wrong way!
-
3rd July 2005, 12:45 PM #5
Yep I've heard of a thicknesser kickback story too and it wasnt pretty.
I'd probably pay the extra. The dust chute alone is worth about $40 alone, and that doesant include the added value to your respiratory health and lost time on cleanup
The anti-kickback feature (if it works) is a freebieHow much wood could the woodchuck chuck if the woodchuck could chuck wood?
-
3rd July 2005, 12:58 PM #6Originally Posted by speedyThose are my principles, and if you don't like them . . . well, I have others.
-
3rd July 2005, 10:26 PM #7
Hi,
thicknessing a piece of stock 200mm long sounds a little dodgy. Usually the accompanying manual will advise on minimum length. This will usually be in the order of about 400 mm.
Regards
Les
-
3rd July 2005, 10:47 PM #8Originally Posted by lesmeyer
Workplace health and Safety were very interestedIf it goes against the grain, it's being rubbed the wrong way!
-
4th July 2005, 08:55 PM #9Senior Member
- Join Date
- Jan 2005
- Location
- West Melbourne
- Age
- 51
- Posts
- 123
Originally Posted by Barry F
As someone else has pointed out already The dust hood is worth $40 by itself anyway and as someone who didn't have one to start off with I can throughly recomend you get one, not only does it make your workshop cleaner but without the dust etc building up on the feed rollers inside I find mine drives better.
The only down side seems to be that when connected up to the DC it really makes a howl.
Cheers
Kiwibrucee
-
5th July 2005, 10:29 AM #10
My machine claims to be able to accept stock 100mm long, I am not game to try it.
Had a knot come out once and flew across the workshop, as stated before, I never stand in line with the openings either end.Stupidity kills. Absolute stupidity kills absolutely.
Similar Threads
-
Anti Kickback Rollers
By DPB in forum HAND TOOLS - POWEREDReplies: 13Last Post: 28th January 2004, 07:06 PM -
Ryobi Thicknesser
By `Felix` in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 15Last Post: 20th January 2004, 11:10 AM -
Ryobi Thicknesser
By Bud in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 22Last Post: 24th October 2003, 11:08 AM -
Dust extraction hood for Ryobi Thicknesser
By Ditty in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 3Last Post: 30th July 2003, 10:16 PM -
Ryobi thicknesser
By Don Nethercott in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 3Last Post: 19th November 2002, 07:57 PM