Results 1 to 12 of 12
  1. #1
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,204

    Default Is this a misuse of my Bessey clamps

    I was out in the shed and I noticed that two of my Bessey DuoKlamps were missing from their usual spot.

    I did not think too much of it. I use them for all sorts of things but I could not remember where I had left them. I just put it down to CRAFT disease and made a mental note to return them to the shed when I found them or remembered where they were.

    I went into the house about half an hour later and I found them.





    Scroll down




    Keep going





    nearly there





    20160619_155748.jpg

    Apparently the clamp that came with the machine was missing and it was never really good. How can one clamp hold anything properly anyway.

    So its Salmon Ravioli made with fresh homemade pasta for dinner tonight.

    And all I have to do is blow the flour out of the clamps with the compressor and lightly oil them.

    Some may regard this as misuse of woodworking tools, and it probably is. But I will be eating well tonight

    And she did a great job of securing the machine to the bench. I could not move it at all.

    Cheers

    Doug
    I got sick of sitting around doing nothing - so I took up meditation.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    7,014

    Default Is this a misuse of my Bessey clamps

    That just means.
    You are now aloud to do any wood work activity in the kitchen area.
    Ie using water stones over the kitchen sink to sharpen chisels.
    Just say I said so [emoji13]

  4. #3
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,204

    Default

    Quote Originally Posted by Simplicity View Post
    That just means.
    You are now aloud to do any wood work activity in the kitchen area.
    Ie using water stones over the kitchen sink to sharpen chisels.
    Just say I said so [emoji13]
    I have one of those Veritas Waterstone ponds so no need to do it over the kitchen sink. When I do a sharpening day I set up at the dining room table. While I am there I usually do the kitchen knives as well.

    I have prime pieces of timber stored in the lounge room because the temperature in the house is more stable than the temperature in the sheds.

    I had my Triton workcentre 2000 with maxi extension table set up and in use in my dining room at my house in Queensland for over 12 months. I still own this house while I am in exile in Melbourne.

    I understand that not every woodworker's partners are so accommodating and I have to wonder why. We help each other where we can and it works.

    Cheers

    Doug
    I got sick of sitting around doing nothing - so I took up meditation.

  5. #4
    Join Date
    Aug 2010
    Location
    ACT
    Age
    84
    Posts
    2,580

    Default

    Not Miss use but Mrs use.
    Hugh

    Enough is enough, more than enough is too much.

  6. #5
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,204

    Default

    Quote Originally Posted by A Duke View Post
    Not Miss use but Mrs use.
    Well not so in reality, She is my girlfriend, not my wife. In my experience girlfriends are less demanding and more fun than wives are.

    Maybe Ms use

    Cheers

    Doug
    I got sick of sitting around doing nothing - so I took up meditation.

  7. #6
    Join Date
    Dec 2010
    Location
    Mornington Peninsula
    Posts
    2,746

    Default

    Just be impressed that she knew where to look for the clamps in your shed.

  8. #7
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Quote Originally Posted by doug3030 View Post
    I was out in the shed and I noticed that two of my Bessey DuoKlamps were missing from their usual spot.

    I did not think too much of it. I use them for all sorts of things but I could not remember where I had left them. I just put it down to CRAFT disease and made a mental note to return them to the shed when I found them or remembered where they were.

    I went into the house about half an hour later and I found them.

    20160619_155748.jpg

    Some may regard this as misuse of woodworking tools, and it probably is. But I will be eating well tonight
    Nah -- just another example of why you can never have enough clamps
    regards from Alberta, Canada

    ian

  9. #8
    Join Date
    Feb 2014
    Location
    Canberra, Australia
    Posts
    370

    Default

    I broke the clamp that came with my Atlas pasta machine and got an aftermarket one shipped from Bake and Brew in Adelaide https://www.bakeandbrew.com.au/produ...machine-clamp/

  10. #9
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,136

    Default

    Quote Originally Posted by doug3030 View Post
    When I do a sharpening day I set up at the dining room table. While I am there I usually do the kitchen knives as well.
    That sounds reminiscent of the philosophy where when planning a rowdy party you invite the neighbours too.

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  11. #10
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,136

    Default

    Quote Originally Posted by doug3030 View Post
    Well not so in reality, She is my girlfriend, not my wife. In my experience girlfriends are less demanding and more fun than wives are.



    Cheers

    Doug
    I was going to add a comment there, but realised I might be asked to vacate the Forums so I won't.

    I would add that your partner, whatever her social/legal status sounds like a wonderful person. I am speaking here as somebody who is not allowed to even traipse a teeney weeney litttle bit of honestly won sawdust through the house on the way to the handbasin without the dagger (damascus style) look.

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  12. #11
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,186

    Default

    Doug, You can use your clamps anyways you please BUT for me personally the pasta machine would never make it into the house....Cheers, Peter

  13. #12
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,204

    Default

    Quote Originally Posted by NathanaelBC View Post
    I broke the clamp that came with my Atlas pasta machine and got an aftermarket one shipped from Bake and Brew in Adelaide https://www.bakeandbrew.com.au/produ...machine-clamp/
    Thanks for the link Nathaniel, but she always had trouble with the old clamp anyway. I usually had to clamp it for her. This time she set it all up herself and she did it well. I could not move that pasta machine a millimeter with all my weight and what's left of my strength behind me. She can use the besseys for that purpose.

    Quote Originally Posted by Bushmiller View Post
    Quote Originally Posted by doug3030 View Post
    When I do a sharpening day I set up at the dining room table. While I am there I usually do the kitchen knives as well.
    That sounds reminiscent of the philosophy where when planning a rowdy party you invite the neighbours too.
    Not quite - we both have different dietary requirements due to medical reasons. As often as not we cook our own meals. We try to do a few dinners a week when we can both eat the same thing and we each have our own specialties that we cook for each other. So I probably use the kitchen knives as often as she does.

    Quote Originally Posted by cava View Post
    Just be impressed that she knew where to look for the clamps in your shed.
    Her knowledge of where things in the shed are is no coincidence. If I need a hand on a complex glue-up she comes out and hands me clamps; she is pretty good on tailing out on the tablesaw, bandsaw etc on a big job.

    But most important of all - How many of us have made sure that their partners and others living with them know how to turn off the power to the shed if you have an accident? She knows what to do if the need arises.

    Thanks for the comments everyone

    Doug
    I got sick of sitting around doing nothing - so I took up meditation.

Similar Threads

  1. Bessey clamps
    By Wongo in forum WOODWORK - GENERAL
    Replies: 78
    Last Post: 15th August 2011, 03:45 PM
  2. bessey clamps
    By Mick72 in forum HAND TOOLS - UNPOWERED
    Replies: 3
    Last Post: 31st March 2010, 09:11 PM
  3. Sash clamps versus Bessey K series clamps
    By zelk in forum HINTS & TIPS
    Replies: 8
    Last Post: 6th September 2007, 10:24 PM
  4. Bessey Clamps
    By Pat in forum HAND TOOLS - UNPOWERED
    Replies: 8
    Last Post: 8th January 2007, 06:28 PM
  5. Bessey Clamps
    By Shedhand in forum HAND TOOLS - POWERED
    Replies: 3
    Last Post: 18th August 2006, 07:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •