Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Toolcabinet doors
-
13th April 2013, 08:43 PM #1New Member
- Join Date
- Apr 2013
- Location
- Sweden
- Posts
- 1
Toolcabinet doors
I am in process of building a wall hanging tool cabinet. Have created a frame with dovetails , cut off half of it to create 2 door frames and then glued 5 mm oak panel into a milled recess in each frame. All in oak dried etc so my worry now is, will the glued in 5 mm panel swell if i change location and bring it into a more humid room, house. I hope i explain this so all undrstand, Cheers
-
13th April 2013 08:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th April 2013, 10:42 PM #2China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
Now that the job is done it will pretty much be a "wait and see" what occurs if you change location, consider sealing it with polyurathane or similar to help reduce any impact a change may have
-
14th April 2013, 07:38 AM #3
Truth is it will move whether you change location or not, depending on the size and cut of the timber,
question is how much by?
e.g. if they are only narrow and 1/4 sawn I doubt there will be a problem on the other hand if wide and back sawn??
China is right just have to wait and see.
Cheers
Steve
Similar Threads
-
First doors
By codysheridan1 in forum WOODWORK PICSReplies: 5Last Post: 2nd February 2012, 10:16 AM -
Doors on a cabinet?
By Waldo in forum WOODWORK - GENERALReplies: 4Last Post: 27th December 2006, 01:31 PM -
Doors
By Jill in forum WOODWORK PICSReplies: 32Last Post: 28th March 2006, 09:53 PM -
she oak doors
By shep in forum WOODWORK - GENERALReplies: 7Last Post: 9th August 2005, 10:32 PM -
doors
By TOMARTOM in forum WOODWORK - GENERALReplies: 0Last Post: 3rd March 2003, 11:05 AM