Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
Thread: Triton Adirondack chair plans
-
19th October 2022, 05:23 PM #1GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
Triton Adirondack chair plans
Many years ago Triton put out some Adirondack chair plans - I think they were the nicest adirondacks I’ve ever seen. I’ve made them from this plan several times over the years and now I want to make some more but I have lost the plans. Does anyone have a copy, or a scan, or know where I might get some.
I think the plans came out in the 1990s, and you can tell the right ones because the back was just 4 pieces - 2 wide ones in the middle and two narrower and shorter ones on the edge.
Cheers
ArronApologies for unnoticed autocomplete errors.
-
19th October 2022 05:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th October 2022, 05:33 PM #2GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
And just to save some time - I know that there is currently these plans on the Triton website. Attention Required! | Cloudflare
But they are not the ones. The originals weee much nicer. I think it came out as a newsletter in about 1996.Apologies for unnoticed autocomplete errors.
-
19th October 2022, 06:23 PM #3
I have made 2 of these, absolutely the most comfortable ones I have ever sat in
https://www.buildeazy.com/cape-cod-chair/The person who never made a mistake never made anything
Cheers
Ray
-
19th October 2022, 07:05 PM #4
-
23rd October 2022, 02:23 PM #5
Hi Arron,
I have this one pictured below. The description doesn't quite match (5 piece back) but the timeline is about right as far as I can tell.
If it's what you want, and this picture isn't good enough (and it probably is a bit distorted just by being a photo) shoot me a PM with your email and I can scan it to PDF and send it to you.
I have a couple of other similar plans I could dig out (not Triton) if this isn't what you want.
I got sick of sitting around doing nothing - so I took up meditation.
-
23rd October 2022, 03:27 PM #6GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
Actually, forget what I said above, I’ve just found an old photo of our back yard and they were indeed 5 piece backs.
The centre one was the thickest and tallest, the next two (one each side) were thinner and about 50mm lower, and the outside ones were lower again.
Otherwise the photo is obscured and not much use.
Doug, I can’t see the photo you have attached or linked too or whatever?
Cheers
ArronApologies for unnoticed autocomplete errors.
-
23rd October 2022, 03:34 PM #7
Looks like the photo didn't attach properly, trying again.
tritonadirondack.jpgI got sick of sitting around doing nothing - so I took up meditation.
-
23rd October 2022, 04:32 PM #8
-
23rd October 2022, 04:46 PM #9GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
-
23rd October 2022, 05:07 PM #10
Arron, I will post the PDF here. Probably in my own best interests for me to do so or I will be getting hit up every second week by people asking for a free plan. I'm sure it will be easier for you to work form the PDF in any case.Pretty sure this will be out of copyright by now anyway.
Best of luck with your build.
tritonadirondack.pdfI got sick of sitting around doing nothing - so I took up meditation.
-
23rd October 2022, 05:32 PM #11GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
Ok, I’ve printed that out.
I will probably make it with a slight curve in the back. I guess Triton made the back straight across because most of its readers would have had no access to a bandsaw back then. A bit different now.
Thanks again, and thanks to the other members who participated in this thread.
Cheers
ArronApologies for unnoticed autocomplete errors.
-
23rd October 2022, 05:42 PM #12
-
23rd October 2022, 08:47 PM #13GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
-
23rd October 2022, 10:57 PM #14
Similar Threads
-
Project - Adirondack chair
By Huon pine fan in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 10Last Post: 22nd October 2022, 07:38 PM -
Adirondack chair
By Tonyz in forum WOODWORK - GENERALReplies: 4Last Post: 3rd January 2022, 09:22 PM -
Plans required for Adirondack Chair
By Vintage111 in forum WOODWORK - GENERALReplies: 16Last Post: 7th January 2021, 07:55 PM -
Adirondack Chair Timber
By Pariss in forum WOODWORK - GENERALReplies: 23Last Post: 10th August 2016, 07:21 PM -
Adirondack Chair
By davo453 in forum WOODWORK PICSReplies: 2Last Post: 18th March 2004, 02:19 PM