Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    May 2019
    Location
    Canberra, Australia
    Posts
    306

    Default Triton MK3 tabletop assembly issue

    I am having an issue assembling my Triton MK3. The tabletop is too short for the frame and only fits one pair of holes - if I attach one side the other comes loose. I can't find a way top lengthen the tabletop, narrow the frame or move the mounting screws. Can anyone help?

    Image album:
    https://imgur.com/a/45udo2A

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2003
    Location
    Conder, ACT
    Age
    77
    Posts
    6,051

    Default

    All is correct. You need to push the locking pins in and rotate by 90 degrees.
    There is a lug on the side of the pins that fills the gap.

  4. #3
    Join Date
    Oct 2008
    Location
    Brisbane
    Posts
    145

    Default

    That’s the way it’s supposed to be.
    Do this:
    Push the table top hard against the built in knobs on one end. The table top should locate into these pins.
    Next, turn the L shaped locking bars horizontal. These L shaped bars will have little tabs that stand out from the round bar rod, like little wings. When these L brackets are horizontal, the wings will line up with slots in the end plate. Push them thru as far as they’ll go, then the ends of the L bracket lock into the holes in the table top. When this is done, turn the L brackets down so they line up vertical, pointing down. This will lock everything up


    Sent from my iPhone using Tapatalk

  5. #4
    Join Date
    May 2019
    Location
    Canberra, Australia
    Posts
    306

    Default

    Silly me!

    Thanks guys

Similar Threads

  1. Triton TRA01 Winder handle assembly
    By simops in forum TRITON / GMC
    Replies: 18
    Last Post: 12th October 2016, 11:32 AM
  2. Triton Mk3 Assembly/instruction manual
    By Zaphod in forum TRITON / GMC
    Replies: 2
    Last Post: 29th June 2012, 05:40 PM
  3. Sliding Triton WC2000 Plate Assembly
    By Knurl in forum TRITON / GMC
    Replies: 6
    Last Post: 25th January 2011, 03:59 PM
  4. Triton 2000 workcentre, switch assembly
    By ftwildstrike in forum TRITON / GMC
    Replies: 4
    Last Post: 26th November 2010, 07:28 AM
  5. Assembly of Triton 2000 Workcentre
    By Kylee Tramm in forum HAND TOOLS - POWERED
    Replies: 4
    Last Post: 9th September 2010, 09:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •