Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Veneers
-
10th March 2014, 02:46 PM #1Novice
- Join Date
- Aug 2007
- Location
- marcoola qld
- Posts
- 18
Veneers
I am looking for a supplier of veneer.
Does anyone know a supplier in Qld or a supplier who sells on the web
Bob
-
10th March 2014 02:46 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th March 2014, 04:48 PM #2
I don't know anything about this mob other than what is on their web site. http://www.topveneer.com.au/ I believe they are NQ.
I have no connection with this organisation or make any recommendation and this link is provided in good faith.Russell (aka Mulgabill)
"It is as it is"
-
10th March 2014, 07:14 PM #3... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 2,084
Bob,
Are you after the 0.6 mm veneers or something more substantial?
I cut veneers for forum members. Usually, they are between 2 and 3 mm. Recently sold some sanded 2.3 mm Dillenia veneers in the Market Place at this forum for about $33.00 per sq m. I also cut timber provided by forum members into veneers, but I can't help you if you want the 0.6mm material.
Have fun!
John
-
11th March 2014, 02:49 PM #4Novice
- Join Date
- Aug 2007
- Location
- marcoola qld
- Posts
- 18
veneers
I am looking for .6mm veneers. Rivergum timbers has vanished into the ether Richard was a good supplier
I will try Peter Scott-Young in Melbourne He's not on the web but has good stocks
Thanks for the replies
Bob
Similar Threads
-
Veneers, wth?
By Waldo in forum WOODWORK - GENERALReplies: 25Last Post: 16th January 2010, 08:27 PM -
Veneers
By Shaver in forum WOODWORK - GENERALReplies: 2Last Post: 2nd August 2006, 12:03 AM -
Veneers
By scuttle in forum MARQUETRY and INTARSIAReplies: 0Last Post: 6th February 2006, 04:52 PM -
Veneers
By maglite in forum TIMBERReplies: 0Last Post: 3rd February 2006, 12:10 AM -
Sources of veneers
By Keith Forbes in forum TIMBERReplies: 2Last Post: 25th March 2001, 04:48 PM